Faculty  Full Time Professors  Research Professor  Invited Professor  Professor Emeritus  Visiting Emeritus  WCU Invited Professor  Adjunct Professor Staff Home > People Thomas J.R. Hughes Ph.D., University of California, Berkeley, 74 / MS, University of California, Berkeley, 74 / ME, Pratt Institute, Brooklyn, 67 / BE, Pratt Institute, Brooklyn, 65 / Engineering Science /hughes@ices.utexas.edu   Position: WCU Invited Professor Research area: Computational Mechanics Location: #41-308, Building 41 Telephone: +82 52 259 1039 Fax: +82 52 259 2836 Email: hughes@ices.utexas.edu Homepage: http://users.ices.utexas.edu/~hughes/    Brief career history 1965 B.E., Mechanical Engineering, Pratt Institute, USA 1967 M.E., Mechanical Engineering, Pratt Institute, USA 1974 M.Sc., Mathematics, University of California-Berkeley, USA 1974 Ph.D., Engineering Science, University of California-Berkeley, USA    Research interests Computational Mechanics Isogeometric Analysis: Integration of Computer-Aided Design and Finite Element Analysis Variational Multiscale Methods for Complex Fluid Flows and Turbulence Patient-Specific Cardiovascular Modeling and Simulation Technologies Phase-Field Methods     Current and Previous Academic Positions Assistant Research Engineer, University of California Berkeley, 1974-76. Lecturer, University of California, Berkeley, Department of Civil Engineering, 1975-76 Assistant Professor, California Institute of Technology, Structural Mechanics, 1976-78 Associate Professor, Stanford University, Mechanical Engineering, 1980-82 Professor, Stanford University, Mechanical Engineering, 1983-2002 Chairman, Stanford University, Division of Applied Mechanics, 1984-88 Professor, Stanford University, Civil and Environmental Engineering by Courtesy, 1985-2002 Chairman, Stanford University, Department of Mechanical Engineering, 1988-89 Chairman, Stanford University, Division of Applied Mechanics, 1994-96 Chairman, Stanford University, Division of Mechanics and Computation, 1996-2002 Mary and Gordon Crary Family Professor of Engineering, Stanford University, 1998-2002 Professor, The University of Texas at Austin, Department of Aerospace Engineering and Engineering Mechanics, September 2002 - present.     Other Professional Experience Mechanical Design Engineer, Grumman Aircraft Engineering, Bethpage, Long Island, 1965-66 Research and Development Engineer, General Dynamics, Electric Boat, Groton, CN, 1967-69 Director, MARC Analysis Research Corporation, Palo Alto, CA, 1989 Founder, President and CEO, Centric Engineering Systems, Sunnyvale, CA, 1990-92 Chairman of the Board of Directors, Centric Engineering Systems, Sunnyvale, CA, 1990-99 Director, Aerosonix, Santa Clara, CA, 1995-96     Memberships in Professional and Honorary Societies Society of Engineering Science (SES) Association for Structural Mechanics in Reactor Technology (IASMiRT) U.S. National Academy of Engineering International Association for Computational Mechanics (IACM) American Society of Mechanical Engineers (ASME) American Society of Civil Engineers (ASCE) Sigma XI Phi Beta Kappa American Institute of Aeronautics and Astronautics (AIAA) American Academy of Mechanics (AAM) International Association for Computational Mechanics (IACM) New York Academy of Sciences American Association for the Advancement of Science (AAAS) Society for Industrial and Applied Mathematics (SIAM) United States and International Associations for Computational Mechanics (USACM) American Mathematics Society (AMS)     Professional Society and Major Governmental Committees, Editorial Boards, and Conferences Organized/Chaired Societies/Committees Member, Computational Mechanics Committee (National Research Council) Chairman, Mathematical Methods Committee of the Engineering Mechanics Division (ASCE) Member, Panel on Advanced Silo Hardening (Defense Nuclear Agency) Member, Panel on Plasticity Theory (Defense Advanced Research Projects Agency) Member, Programs Committee of the Engineering Mechanics Division (ASCE) Member, Publications Committee of the Engineering Mechanics Division (ASCE) Member, Committee on Computational Methods (SES) Chairman, Selection Committee for the Award for Distinguished Service in Applied Mechanics (American Academy of Mechanics) Member, Von Neumann Medal Committee (USACM) Chairman, Peer Review Committee, Minnesota Supercomputer Institute Member, Computational Fluid Mechanics Focus Group, Maui Supercomputer Center Chairman, Executive Committee, Applied Mechanics Division (ASME) Member, Research Management Team, Army High Performance, Computing Research Center, University of Minnesota Chairman, Awards Committee (USACM) Chairman, General Committee, Applied Mechanics Division (ASME) Chairman, Awards Committee (IACM) Member, Committee on Computing in Applied Mechanics, (Past Chairman) (ASME) Member, International Association for Computational Mechanics Executive Council (Past President) Member, Executive Committee, Applied Mechanics Division (Past Chairman)(ASME) Member, Drucker Medal Committee (Past Chairman)(ASME) Member, Koiter Medal Committee (Past Chairman)(ASME) Member, Timoshenko Medal Committee (Past Chairman)(ASME) Member, General Committee, Applied Mechanics Division (Past Chairman)(ASME) Member at Large, United States National Committee on Theoretical and Applied Mechanics Member, Thurston Lecture Committee (ASME) Member, Theodore von Karman Prize Committee (SIAM) Member at Large, Applied Mechanics Division/Basic Engineering Group (ASME) Chairman, Committee on Integration of JACM with JACES, the Japanese Societies of Computational Mechanics (IACM) Member, John von Neumann Award Committee (USACM) Member, Richard Gallagher Young Investigator Award Committee (USACM) Member, Computational Structural Mechanics Award Committee (USACM) Member, Fellows Award Committee (USACM) Member, Fellow Award Committee, Aerospace Sciences (AIAA) Vice Chairman, United States National Committee on Theoretical and Applied Mechanics (USNC/TAM) Chairman, Program Committee, The Academy of Medicine, Engineering and Science of Texas (TAMEST). Member, Research Committee, The Academy of Medicine, Engineering and Science of Texas (TAMEST).     Editorial Boards Editorial Board, MicrocomputersinCivilEngineering Editorial Board, ComputationalMechanicsAdvances Associate Editor, JournalofAppliedMechanics(ASME) Associate Editor, JournaloftheEngineeringMechanicsDivision(ASCE) Editorial Board, SpringerMechanicalEngineeringSeries (Book Series) Associate Editor, InternationalJournalforComputationalCivilandStructuralEngineering Editor, ComputerMethodsinAppliedMechanicsandEngineering Advisory Editor, JournalofVisualization Co-Editor, InternationalJournalofNonlinearScienceandNumericalSimulation Associate Editor,InternationalJournalforMultiscaleComputationalEngineering Co-editor, EncyclopediaofComputationalMechanics Honorary Editor, InternationalJournalofComputationalMethods Editorial Board, Numerische Mathematik, International Journal for Numerical Methodsin Engineering, International Journal for Numerical Methods in Fluids, Future Generation Computer Systems, Engineering Computations, Numerical Methods for Partial Differential Equations, Archiveson Computational Methods in Engineering, Theory and Engineering Applications of Computational Methods (Book Series), Computersand Structures, International Journal of Computational and Numerical Analysis and Applications, International Journal of Biomechanics and Modeling in Mechanobioogy, Engineering with Computers, International Journal of Computational Vision and Biomechanics, Computational Mechanics, Interaction and Multiscale Mechanics: anInterntional Journal, Mathematical Models and Methods in Applied Sciences(M3AS), Journal of the Serbian Society for Compuational Mechanics    Conferences Activities (from 2002) International Scientific Committee, Conference on Numerical Methods in Applied Sciences and Engineering, Guanajuato, Mexico, January 17-19, 2002. Scientific Advisory Board, Fifth World Congress on Computational Mechanics (WCCM V), Vienna, Austria, July 7-12, 2002. International Program Committee, 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002. International Organizing Committee, Twelfth International Conference on Finite elements in Flow Problems (FEF 03), Meijo University, Nagoya City, Japan, April 1-3, 2003. International Scientific Committee, 15th International Committee on Computer Methods in Mechanics, CMM-2003, Gliwice/Szczyrk, Poland, June 3-6, 2003. Scientific Program Committee, Seventh U.S. National Congress on Computational Mechanics, Albuquerque, New Mexico, July 27-31, 2003. Co-organizer, NSF Workshop on Simulation Based Engineering Science, Arlington, VA, April 15-16, 2004. Co-organizer, Symposium on Stabilized and Multiscale Finite Element Methods, European Community on Computational Methods in Applied Sciences (ECCOMAS), Conference, Jyvaskla, Finland, July 24-28, 2004. Co-organizer, Symposium on Stabilized and Multiscale Finite Element Methods, 6th World Congress on Computational Mechanics, Beijing, China, Sept. 5-10, 2004. Editorial Board of CST2004: The 7th International Conference on Computational Structures Technology, Lisbon, Portugal, Sept.7-9, 2004. Chairman, Elsevier Editors¡¯ Conference, Sante Fe, NM, October 30, 2004. Co-organizer, Symposium on Challenges and Advances in Flow Simulation and Modeling, ASME International Mechanical Engineering Congress and Exposition (IMECE 2004), Anaheim, CA, November 13-19, 2004. International Advisory Committee, International Conference on Computational Mechanics and Simulation (ICCMS-04), IIT Kanpur, India, Dec. 9-12, 2004. International Advisory Panel, International Conference on Computational Methods (ICCM2004), Singapore, Dec. 15-17, 2004. International Organizing Committee, 13th Finite Elements in Fluids Conference(FEF05), University of Wales, Swansea, April4-6, 2005. Co-organizer, Symposium on Stabilized/Multiscale Methods in Computational Fluid Dynamics, 13th Finite Elements in Fluids Conference(FEF05), University of Wales, Swansea, April4-6, 2005 Technical Advisory Panel, Computational Methods for Coupled Problems in Science and Engineering, ECCOMAS Thematic Conference, Island of Santorini, Greece, May 25-28, 2005. Co-organizer, Symposium on Advanced Computational Methods for Shells, 5th International Conference on Computation of Shell and Spatial Structures, Salzburg, Austria, June1-4, 2005. Organizing Committee, 8th U.S. National Congresson Computational Mechanics, Austin, TX, July24-28, 2005. International Scientific Committee, 16th International Conference on Computer Methods in Mechanics(CMM-2005), Czestochowa, Poland, June14-17, 2005. Scientific Program Committee, 8th U.S. National Congress on Computational Mechanics, Austin, TX, July24-28, 2005. Co-organizer, Symposium on Stabilized and Multiscale Finite Element Methods, 8thU.S.NationalCongressonComputationalMechanics,Austin,TX,July24-28,2005. Organizer, Drucker Medal Symposium, ASME International Engineering Conference and Exposition, Walt Disney World, Dolphin Hotel, Orlando, FL, November 5-11, 2005. International Advisory Committee, Challenges in Computational Mechanics, Ecole Normale Superiore de Cachan, Cachan, France, May 10-12, 2006. Advisory Committee, The 4th International Symposium on Computational Wind Engineering(CWE2006), Pacifico Yokohama, Yokohama, Japan, July16-19, 2006. Co-organizer, Symposium on ¡°Computational Geometry and Analysis,¡± 7th World Congresson Computational Mechanics, Los Angeles, California, July16-22, 2006. Co-organizer, Symposium on ¡°Advances in Large Eddy Simulation of Turbulent Flows,¡± 7th World Congresson Computational Mechanics, Los Angeles, California, July16-22, 2006. Scientific Advisory Board, 7th World Congresson Computational Mechanics, Century Plaza Hoteland Spa, Los Angeles, California, July16-22, 2006. International Advisory Committee, EASEC-10, Tenth East Asia-Pacific Conference on Structural Engineering & Construction, Bangkok, Thailand, August 3-5, 2006. Scientific Committee, CompIMAGE, Computational Modelling of Objects Represented in Images - Fundamentals, Methods and Applications, Coimbra, Portugal, October 20-21, 2006. International Advisory Committee, 2nd International Congresson Computational Mechanics and Simulation (ICCMS?04), Indian Institute of Technology, Guwahati, India, 8-10 December 2006. Program Chairman, The Academy of Medicine, Engineering and Science of Texas (TAMEST), Annual Meeting, Renaissance Hotel, Austin, Texas, January 4-5, 2007. Co-organizer, Symposium on ¡°Turbulence Simulation: Methods and Applications,¡± FEF ¡¯07, 14th International Conference on Finite Elements in Flow Problems, SantaFe, NM, March 26-28, 2007. Co-organizer, Symposium on ¡°Stabilized Multiscale and Multiphysics Methods,¡± FEF ¡¯07, 14th International Conference on Finite Elements in Flow Problems, SantaFe, NM, March 26-28, 2007. Scientific Committee, International Workshop on Higher-order Finite Element Methods, Herrsching am Ammersee (near Munich), Germany, May 17-19, 2007. Technical Advisory Panel, Second Conference on Computational Methods for Coupled Problems in Science and Engineering (Coupled 2007), Santa Eulalia, Ibiza Island, Spain, May 21-23, 2007. Local Organizing Committee, McMat ¡¯07, ASME Applied Mechanics and Materials Conference, UT Austin, Texas, June 3-7, 2007. International Advisory Board, Computational Methods in Structural Dynamics and Earthquake Engineering, (COMPDYN), Rethymnon, Crete, Greece, June 13-15, 2007 International Scientific Committee, 17th International Conference on Computer Methods in Mechanics, CMM-2007, Lodz, Poland, June19-22, 2007 Co-organizer, Symposium on ¡°Bioimaging and Visualization,¡± 8th World Congress on Computational Mechanics, Venice, Italy, June 30 to July 5, 2008. Co-organizer, Symposium on ¡°Models and Methods in Computational Vascular and Cardiovascular Mechanics,¡± U.S. National Congress on Computational Mechanics, San Francisco, July 23-26, 2007. Technical Advisory Board, Ninth U.S. National Congress on Computational Mechanics, San Francisco, California, July 22-26, 2007. Organizing Committee, International Conference on Theoretical and Numerical Fluid Dynamics III, Pacific Institute of Mathematical Sciences, Vancouver, B.C., Canada, August 11-17, 2007. Scientific Committee, First ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, University of Porto, Porto, Portugal, October 2007. Advisory Committee, International Conference on Computer Aided Engineering, Chennai (Madras), India, December 13-15, 2007. International Advisory Committee, IASS-IACM 2008, International Conference and Shell and Spatial Structures, Cornell University, Ithaca, New York, May 28-31, 2008. Scientific Committee, United States National Congress on Computational Mechanics, Columbus, Ohio, July 2009. International Advisory Committee, First African Conference on Computational Mechanics, Sun City, Africa, January 7-11, 2009. International Advisory Committee, Computational Structural Engineering CSE 2009, Shanghai, China, June 22-24, 2009. Technical Advisory Council, Coupled 2009, Coupled Problems in Science and Engineering, Ischia, Italy, June 8-11, 2009. Scientific Committee, COMPDYN 2009, Computational Methods in Structural Dynamics and Earthquake Engineering, Rhodes, Greece, June 22-24, 2009. Technical Advisory Panel, Marine 2009, Computational Methods in Marine Engineering, Trondheim, Norway, June 15-17, 2009. Scientific Committee, Ti 2009, 2nd International Conference on Turbulence and Interactions, Martinique(France), June1-6, 2009. International Advisory Board, ECCM 2010, Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, May 16-21, 2010.     Other Professional Highlights Adjunct Professor, Rice University, Mechanical Engineering and Materials Science, 2002-present Mary and Gordon Crary Professor of Engineering Emeritus, Stanford University, 2002-present Faculty, ROSE School, European School for Advanced Studies in Reduction of Seismic Risk, Istituto Universitario di Studi Superiori di Pavia, Universita degli Studi di Pavia, Pavia, Italy. One of seven U.T. Austin engineering faculty identified as most highly cited in the world, 2003. Judge, Robert J. Melosh Medal Competition, Duke University, Durham, NC, April 28, 2006. Over 14,000 citations to my published work (Reference: ICES Annual Report, 2005, based on ¡°Cited Search¡± data from ISI Thompson Web of Science). Program Chairman, The Academy of Medicine, Engineering and Science of Texas (TAMEST), Annual Meeting, Renaissance Hotel, Austin, Texas, January 4-5, 2007. Initiated joint ICES?Department of Mechanical Engineering program in Cardiovascular Engineering, January 2006. Over 15,000 citations to my published work (Reference: ICES Annual Report 2006, based on ¡°Cited Search¡± data from ISI Thompson Web of Science). Over 16,000 citations to my published work (Reference: ICES Annual Report 2007, based on ¡°Cited Search¡± data from ISI Thompson Web of Science). Elected Chairman of the U.S. National Committee of Theoretical and Applied Mechanics (USNC/TAM), National Research Council, and National Academies.     University Committees /Administrative Assignments University Committees Member, ASE/EM Committee to Evaluate Hans Mark and Ivo Babuska, 2003 Member, ASE/EM Promotion Committee for Jeff Bennighof, 2003 Member, ICES Search Committee, Computational and Applied Mathematics Chair II, 2002-03 Member, School of Natural Science Search Committee, Director of Computational Biology, 2002-03 Member, ASE/EM Senior Exit Survey Committee, 2003 Member, Cockrell School of Engineering, Faculty Promotions Committee, 2003-2004 Member, ASE/EM Promotion Review Committee for L. Raja, 2004 Member, ASE/EM Awards Committee, 2004-06 Member, Mathematics Department Instructor¡¯s Committee, 2002-2007 Member, ICES Computational and Applied Mathematics Admissions and Fellowship Committee, 2002-present Member, ICES Advisory Board, 2002-present Member, ICES Search Committee, Distributed and Grid Computing Chair, 2002-2007 Member, ICES VIGRE Fellowship Representative to Mathematics Department, 2002-2007 Member, ICES Computational and Applied Mathematics Graduate Studies Committee, 2004-present Member, ICES Industrial Partners Task Force, 2005 ? present Member, ICES Undergraduate Concentration and Certificate Program Committee, 2006 ? present. Member, Cockrell School of Engineering, Mathematics and Science Committee, present Member, ASE/EM Budget Council Committee, 2002-present Member, ASE/EM Graduate Studies Committee, 2002-present Member, ASE/EM Faculty Evaluation Committee, 2003-present Member, ASE/EM PhD Written Qualifying Exam Committee (Dynamics), 2004-present Chairman, ASE/EM Awads Committee, 2006-07 Member, ASE/EM Post-Tenure Review Committee, 2007-2008 Member, ASE/EM Structural Dynamics Search Committee, 2008.    Honors and Awards 1957 General Excellence Medal, Good Shepherd School 1961 New York State Scholarship in Science and Engineering 1961 Dean¡¯s Scholarship, Pratt Institute 1971 Popert Fellowship in Civil Engineering, University of California, Berkeley 1975 Bernard Friedman Memorial Prize in Applied Mathematics, University of California, Berkeley 1978 Walter L. Huber Civil Engineering Research Prize, ASCE 1979 Melville Medal, ASME 1982 Fellow, American Academy of Mechanics 1985 Fellow, ASME 1986 AGARD Lecturer (von Karman Institute of Fluid Dynamics, Rhode-Saint-Genese, Belgium) 1987 AGARD Lecturer (various research laboratories and universities in and around Paris, e.g., Ecole Polytechnique, ONERA, Universite de Paris, VI, etc.) 1992 AGARD Lecturer (von Karman Institute of Fluid Dynamics, Rhode-Saint-Genese, Belgium) 1992 AGARD Lecturer (NASA Ames Research Center) 1993 Computational Mechanics Award, Japan Society of Mechanical Engineers 1993 Cited by Industry Week Magazine as one of the ¡°50 individuals whose achievements are shaping the future of our industrial culture and America¡¯s technology policy,¡± December 20, 1993 1995 Member, National Academy of Engineering 1995 Fellow, USACM 1995 Associate Fellow, AIAA 1995 Co-authored paper which was co-winner of Robert J. Melosh Competition at Duke University 1995 Technical Achievement Award, National Academy of Engineering 1996 Associate Fellow, AIAA 1997 Von Neumann Medal, USACM 1997 Dean¡¯s Award for Academic Accomplishment, Stanford University 1998 Fellow, IACM 1998 Gauss-Newton Medal, IACM 1998 Dean¡¯s Distinguished Lecture, U.C. Davis 1998 Endowed Chair, Mary and Gordon Crary Professor of Engineering, Stanford University 1998 Worcester Reed Warner Medal, ASME 1999 Cattedra Galileiana (Galileo Galilei Chair), Scuola Normale Superiore, Pisa, Italy 1999 Honorary Member, Brazilian Association for Computational Mechanics 2000 Eshbach Professor, Northwestern University, Evanston, Illinois 2000 Eshbach Distinguished Lecture, Northwestern University, Evanston, Illinois 2001 Paul M. Chung Distinguished Lecture, University of Illinois at Chicago 2001 Designated ISI Highly Cited Researcher (One of the original 100 most cited engineers in the world). 2002 Designated one of the top 15 individuals in citations by Thompson Institute for Scientific Information/Web of Science in the field of Scientific Computing, based on total citations indexed from 1991 to 2001, Montreal, Canada. 2003 Doctorat honoris causa, Universite catholique de Louvain, Belgium. 2004 Member, Texas Academy of Medicine Science and Engineering. 2004 Advances in Computational Mechanics, A Conference Celebrating the 60thBirthdayofThomasJ.R.Hughes,RiceUniversity,Houston,TX,April7-9,2004. 2004 Honorary Member, World Innovation Foundation, July 2004 2004 FiniteElementMethods:1970¡¯sandBeyond?AbookdedicatedtoThomasJ.R.Hughes,(eds.,L.P.Franca,T.E.TezduyarandA.Masud),CIMNE,Barcelona,Spain,2004. 2004 Michael A. Sadowsky Distinguished Lecturer in Applied Mechanics, Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, NY October 22, 2004. 2004 Samuel D. Conte Distinguished Lecturer in Computer Science, Purdue University, Lafayette, IN, October 25, 2004 2005 Fellow, American Society of Civil Engineers, January 2005 2006 Fellow, American Institute of Aeronautics and Astronautics, April 2006. 2006 Served on the National Science Foundation Blue Ribbon Panel on Simulation-Based Engineering Science 2006 A Tribute to Thomas J. R. Hughes on the Occasion of his 60th Birthday(eds. A.Masud and T.E.Tezduyar), Special Issue, Computer Methods in Applied Mechanics and Engineering, Volume195, Issues 13-16, pp.1,281-1,910, 2006. 2007 Fellow, American Academy of Arts and Sciences, October 6, 2007. 2007 Doctorate honoris causa, University of Pavia, Pavia, Italy, September 24, 2007. 2007 Timoshenko Medal, American Society of Mechanical Engineering, IMECE ¡¯07, Seattle, Washington, November 13, 2007. 2007 Doctorate honoris causa, University of Padua, Padua, Italy, November 20, 2007. URL:http://caronte.dic.unipd.it/addc/index.php?option=com_content&task=view& id=327&Itemid=88 2007 Newmark Distinguished Lecture, Department of Civil Engineering, University of Illinois, Urbana-Champaign, Illinois, November 5, 2007. 2008 JSCES Grand Prize, Japan Society of Computational Engineering, Sendai, Japan, May 19, 2008.     Publications - Refereed Journal Publications ¡°Finite Element Method for Piezoelectric Vibration¡± (with H. Allik), International Journal for Numerical Methods in Engineering, 151-157(1970). ¡°On the One-Dimensional Theory of Blood Flow in the Larger Vessels¡± (with J. Lubliner), Mathematical Bioscience, Vol.18, 161-170(1973). ¡°Reduction Scheme for Some Structural Eigenvalue Problems by a Variational Theorem,¡± International Journal for Numerical Methods in Engineering, Vol.10, 845-852 (1976). ¡°A Finite Element Method for a Class of Contact-Impact Problems¡± (with R. L. Taylor, J. L. Sackman, A. Curnier, W. Kanoknukulchai), Computer Methods in Applied Mechanics and Engineering, Vol.8, 249-276(1976). ¡°Stability, Convergence and Growth and Decay of Energy of the Average Acceleration Method in Nonlinear Structural Dynamics,¡± Computers and Structures, Vol.6, 313-324(1976). ¡°A Reduction Scheme for Problems of Structural Dynamics¡± (with H. M. Hilber and R.L. Taylor), International Journal of Solids and Structures, Vol.12, 749-767 (1976). ¡°A Note on the Stability of Newmark's Algorithm in Nonlinear Structural Dynamics,¡± International Journal for Numerical Methods in Engineering, Vol.11, 383-386 (1977). ¡°Well-Posed Quasi-Linear Second-Order Hyperbolic Systems with Applications to Nonlinear Elastodynamics and General Relativity¡± (with T. Kato and J. E. Marsden), Archive for Rational Mechanics and Analysis, Vol.63, 273-294(1977). ¡°Unconditionally Stable Algorithms for Nonlinear Heat Conduction,¡± Computer Methods in Applied Mechanics and Engineering, Vol.10, 135-139(1977). ¡°Improved Numerical Dissipation for Time Integration Algorithms in Structural Dynamics¡± (with H. M. Hilber and R. L. Taylor), Earthquake Engineering and Structural Dynamics, Vol.5, 283-292, 1977. ¡°A Simple and Efficient Finite Element for Plate Bending¡± (with W. Kanoknukulchai and R. L. Taylor), International Journal for Numerical Methods in Engineering, Vol.11, 1529-1543(1977). ¡°Some Applications of Geometry in Continuum Mechanics¡± (with J. E. Marsden), Reports on Mathematical Physics, Vol.12, 35-44(1977). ¡°Equivalence of Finite Elements for Nearly Incompressible Elasticity,¡± Journal of Applied Mechanics, Vol.99, 181-183(1977). ¡°Classical Elastodynamics as a Linear Symmetric Hyperbolic System¡± (with J. E. Marsden), Journal of Elasticity, Vol.8, 97-110(1978). ¡°Collocation, Dissipation and 'Overshoot' for Time Integration Schemes in Structural Dynamics¡± (with H. M. Hilber), Earthquake Engineering and Structural Dynamics, Vol.6, 99-118(1978). ¡°Finite Element Methods for Nonlinear Elastodynamics Which Conserve Energy¡± (with T. K. Caughey and W. K. Liu), Journal of Applied Mechanics, Vol.45, 366-370(1978). ¡°Implicit-Explicit Finite Elements in Transient Analysis: Stability Theory¡± (with W. K. Liu), Journal of Applied Mechanics, Vol.45, 371-374(1978). ¡°Implicit-Explicit Finite Elements in Transient Analysis: Implementation and Numerical Examples¡± (with W. K. Liu), Journal of Applied Mechanics, Vol.45, 375-378(1978). ¡°Mixed Finite Element Methods -- Reduced and Selective Integrations Techniques: A Unification of Concepts¡± (with D. S. Malkus), ComputerMethodsinAppliedMechanicsandEngineering,Vol.15,63-81(1978). ¡°Product Formulas and Numerical Algorithms¡± (with A. J. Chorin, M. F. McCracken and J. Marsden), Communications on Pure and Applied Mathematics, Vol.31, 205-256(1978). ¡°Reduced and Selective Integration Techniques in the Finite Element Analysis of Plates¡± (with M. Cohen and M. Haroun), Nuclear Engineering and Design, Vol.46, 203-222(1978). ¡°A Simple Scheme for Developing 'Upwind' Finite Elements,¡± International Journal for Numerical Methods in Engineering, Vol.12, 1359-1365(1978). ¡°Unconditionally Stable Algorithms for Quasi-Static Elasto/Visco-Plastic Finite Element Analysis¡± (with R. L. Taylor), Computers and Structures, Vol.8, 169-173(1978). ¡°Consistent Linearization in Mechanics of Solids and Structures¡± (with K. S. Pister), Computers and Structures, Vol.8, 391-397(1978). ¡°The 'Heterosis' Finite Element for Plate Bending¡± (with M. Cohen), Computers and Structures, Vol.9, 445-450(1978). ¡°Implicit-Explicit Finite Elements in Nonlinear Transient Analysis¡± (with K. S. Pister and R. L. Taylor), Computer Methods in Applied Mechanics and Engineering, Vol.17/18, Part1, 159-182(1979). ¡°Review of Finite Element Analysis of Incompressible Viscous Flows by the Penalty Function Formulation¡± (with W. K. Liu and A. Brooks), Journal of Computational Physics, Vol.30, 1-60(1979). ¡°Lagrangian-Eulerian Finite Element Formulation for Incompressible Viscous Flows¡± (with T. Zimmermann and W. K. Liu), Computer Methods in Applied Mechanics and Engineering, Vol.29, 329-349(1981). ¡°Analysis of Gravity Offshore Structure Foundations¡± (with J. H. Prevost and M. F. Cohen), Journal of Petroleum Engineering, SPE, pp.199-209, February1980. ¡°Techniques for Developing 'Special' Finite Element Shape Functions with Particular Reference to Singularities¡± (with J. E. Akin), International Journal for Numerical Methods in Engineering, Vol.15, 733-751(1980). ¡°Convergence of Implicit-Explicit Algorithms in Nonlinear Transient Analysis¡± (with R. A. Stephenson), International Journal of Engineering Science, Vol.19, 295-302(1981). ¡°Offshore Gravity Structures: Analysis¡± (with J. H. Prevost, B. Cuny and R. F. Scott), JournalofGeotechnicalEngineeringDivision,Vol.107,143-165,February1981. ¡°Recent Developments in Computer Methods for Structural Analysis,¡± Nuclear Engineering&Design, Vol.57, No.2, 427-439(1980). ¡°A Large Deformation Formulation for Shell Analysis by the Finite Element Method¡± (with W. Kanoknukulchai and R. L. Taylor), Computers and Structures, Vol.13, 19-30(1981). ¡°Recent Trends in Finite Element Research,¡± Applied Mechanics Reviews, Vol.33, No.11, 1467-1477(1980). ¡°Finite Rotation Effects in Numerical Integration of Rate Constitutive Equations Arising in Large-Deformation Analysis¡± (with J. Winget), International Journal for Numerical Methods in Engineering, Vol.15, 1862-1867(1980). ¡°Nonlinear Finite Element Analysis of Shells: Part I - Three-Dimensional Shells¡± (with W. K. Liu), Computer Methods in Applied Mechanics and Engineering, Vol.26, 331-362(1981). ¡°Nonlinear Finite Element Analysis of Shells: Part II - Two-Dimensional Shells¡± (with W. K. Liu), Computer Methods in Applied Mechanics and Engineering, Vol.27, 167-181(1981). ¡°Generalization of Selective Integration Techniques to Nonlinear and Anisotropic Media,¡± International Journal for Numerical Methods in Engineering, Vol.15, No.9, 1413-1418(1980). ¡°Finite Element Solution of Elastic-Plastic Boundary Value Problems¡± (with J. H. Prevost), Journal of Applied Mechanics, Vol.48, 69-74, March1981. ¡°Finite Elements Based Upon Mindlin Plate Theory with Particular Reference to the Four-Node Bilinear Isoparametric Element¡± (with T. E. Tezduyar), Journal of Applied Mechanics, 587-596, September1981. ¡°Streamline Upwind/Petrov-Galerkin Formulation for Convection Dominated Flows with Particular Emphasis on the Incompressible Navier-Stokes Equations,¡± (with A. N. Brooks), Computer Methods in Applied Mechanics and Engineering, Vol.32, 199-259(1982). ¡°Nonlinear Finite Element Shell Formulation Accounting for Large Membrane Strains¡± (with E. Carnoy), Computer Methods in Applied Mechanics and Engineering, Vol.39, 69-82(1983). ¡°Unconditionally Stable Element-by-Element Implicit Algorithms for Heat Conduction Analysis¡± (with I. Levit and J. Winget), Journal of Engineering Mechanics, ASCE, Vol.109, No.2, 576-585, April1983. ¡°A Profile Solver for Specially Structured Symmetric-Unsymmetric Equation Systems¡±(with J.Winget), Advances in Engineering Software, Vol.4, No.2, 64-67(1982). ¡°Finite Element Analysis of the Secondary Buckling of a Flat Plate Under Axial Compression¡± (with E. G. Carnoy), International Journal of Non linear Mechanics, Vol.36, No.2, 241-254, 1983. ¡°An Improved Treatment of Transverse Shear in the Mindlin Type Four-Node Quadrilateral Element¡± (with A. Tessler), Computer Methods in Applied Mechanics and Engineering, Vol.39, 311-335(1983). ¡°A Precis of Developments in Computational Methods for Transient Analysis,¡± (with T. Belytschko), 50th Anniversary Issue of the Journal of Applied Mechanics, 1033-1041, December 1983. ¡°Analysis of Some Fully-Discrete Algorithms for the One-Dimensional Heat Equation¡± (with T. E. Tezduyar), International Journal for Numerical Methods in Engineering, Vol.21, 163-168(1985). ¡°Stability and Accuracy Analysis of Some Fully-Discrete Algorithms for the One-Dimensional Second-Order Wave Equation¡± (with T. E. Tezduyar), Computers and Structures, Vol.19, No.4, 665-668(1984). ¡°Finite Element Methods for First-Order Hyperbolic Systems with Particular Emphasis on the Compressible Euler Equations¡± (with T. E. Tezduyar), Computer Methods in Applied Mechanics and Engineering, Vol.45, 217-284(1984). ¡°Solution Algorithms for Nonlinear Transient Heat Conduction Analysis Employing Element-by-Element Iterative Strategies¡± (with J. M. Winget), Computer Methods in Applied Mechanics and Engineering, Vol.52, 711-815(1985). ¡°A Three-Node Mindlin Plate Element with Improved Transverse Shear¡± (with A. Tessler), Computer Methods in Applied Mechanics and Engineering, Vol.50, 71-101(1985). ¡°On the Variational Foundations of Assumed Strain Methods¡± (with J. Simo), Journal of Applied Mechanics, Vol.53, 51-54, March 1986. ¡°A Petrov-Galerkin Finite Element Method for Convection Dominated Flows: An Accurate Upwinding Technique for Satisfying the Maximum Principle¡± (with A. Mizukami), Computer Methods in Applied Mechanics and Engineering, Vol.50, 181-193(1985). ¡°Element-by-Element and Global Preconditioners: A Survey¡± (with A. Muller), Metodos Numericospara Calculoy Disenoen Ingenena, Vol.2, No.1, 27-41(1986). ¡°An Error Analysis of Truncated Starting Conditions in Step-by-Step Time Integration: Consequences for Structural Dynamics¡± (with G. M. Hulbert), Earthquake Engineering and Structural Dynamics, Vol.15, 901-910(1987). ¡°A New Finite Element Formulation for Computational Fluid Dynamics: I. Symmetric Forms of the Compressible Euler and Navier-Stokes Equations and the Second Law of Thermodynamics¡± (with L. Franca and M. Mallet), Computer Methods in Applied Mechanics and Engineering, Vol.54, No.2, 223-234(1986). ¡°A New Finite Element Formulation for Computational Fluid Dynamics: II. Beyond SUPG¡± (with M. Mallet and A. Mizukami), Computer Methods in Applied Mechanics and Engineering, Vol.54, No.3, 341-355(1986). ¡°Convergence of an Element-Partitioned Subcycling Algorithm for the Semi-Discrete Heat Equation¡± (with T. Belytschko and W. K. Liu), Numerical Methods for Partial Differential Equations, Vol.3, 131-137(1987). ¡°Pseudo-corner Theory: A Simple Enhancement of J2-flow Theory for Applications Involving Non-Proportional Loading¡± (with F. Shakib), Engineering Computations, Vol.3, No.2, June 1986. ¡°A New Finite Element Formulation for Computational Fluid Dynamics: V. Circumventing the Babuska-Brezzi Condition: A Stable Petrov-Galerkin Formulation of the Stokes Problem Accommodating Equal-order Interpolations¡± (with L. Franca and M. Balestra), Computer Methods in Applied Mechanics and Engineering, Vol.59, pp85-99(1986). ¡°A New Finite Element Formulation for Computational Fluid Dynamics: III. The Generalized Streamline Operator for Multidimensional Advective-Diffusive Systems¡± (with M. Mallet), Computer Methods in Applied Mechanics and Engineering, Vol.58, pp305-328(1986). ¡°Discussion of A Numerical Study of Localized Deformation in Bi-Crystals,¡± by J. LeMonds, R. J. Asaro and A. Needleman,¡± Mechanics of Materials, Vol.4, 437-438(1986). ¡°Petrov-Galerkin Formulations of the Timoshenko Beam Problem¡± (with A. F. D. Loula and L. P. Franca), Computer Methods in Applied Mechanics and Engineering, Vol.63, 115-132(1987). ¡°Mixed Petrov-Galerkin Methods for the Timoshenko Beam Problem¡± (with A. F. D. Loula, L. P. Franca and I. Miranda), Computer Methods in Applied Mechanics and Engineering, Vol.63, 133-154(1987). ¡°A New Family of Stable Elements for Nearly Incompressible Elasticity Based on a Mixed Petrov-Galerkin Finite Element Formulation¡± (with L. P. Franca, A. F. D. Loula and I. Miranda) Numerische Mathematik, Vol.53, 123-141(1988). ¡°Stability, Convergence and Accuracy of a New Finite Element Method for the Circular Arch Problem¡± (with A. F. D. Loula, L. P. Franca and I. Miranda), Computer Methods in Applied Mechanics and Engineering, Vol.63, 281-303(1987). ¡°A New Finite Element Formulation for Computational Fluid Dynamics: VI Convergence Analysis of the Generalized SUPG Formulation for Linear Time-Dependent Multidimensional Advective-Diffusive Systems¡± (with L. P. Franca and M. Mallet), Computer Methods in Applied Mechanics and Engineering, Vol.63, 97-112(1987). ¡°Recent Progress in the Development and Understanding of SUPG Methods with Special Reference to the Compressible Euler and Navier-Stokes Equations,¡± International Journal for Numerical Methods in Fluids, Vol.7, 1261-1275, 1987. ¡°A New Finite Element Formulation for Computational Fluid Dynamics: VII. The Stokes Problem with Various Well-Posed Boundary Conditions: Symmetric Formulations that Converge for all Velocity/Pressure Spaces¡± (with L.P. Franca), Computer Methods in Applied Mechanics and Engineering, Vol.65, 85-96(1987). ¡°Convergence of Transverse Shear Stresses in the Finite Element Analysis of Plates¡± (with L. P. Franca), Communications in Applied Numerical Methods, Vol.4, 185-187(1988). ¡°Space-Time Finite Element Methods for Elastodynamics: Formulations and Error Estimates¡± (with G.M. Hulbert), Computer Methods in Applied Mechanics and Engineering, Vol.66, 339-363(1987). ¡°A Mixed Finite Element Formulation for Reissner-Mindlin Plate Theory: Uniform Convergence of all Higher-order Spaces¡± (with L. P. Franca), Computer Methods in Applied Mechanics and Engineering, Vol.67, 223-240(1988). ¡°An Improved Implicit-Explicit Time Integration Method for Structural Dynamics¡± (with I. Miranda and R. M. Ferencz), Earthquake Engineering and Structural Dynamics, Vol.18, 643-653(1989). ¡°Two Classes of Mixed Finite Element Methods¡± (with L.P. Franca), Computer Methods in Applied Mechanics and Engineering, Vol.69, 89-129(1988). ¡°A New Finite Element Formulation for Computational Fluid Dynamics: VIII. The Galerkin/Least-Squares Method for Advective-Diffusive Equations¡± (with L.P. Franca and G.M. Hulbert), Computer Methods in Applied Mechanics and Engineering, Vol.73, 173-189(1989). ¡°On Drilling Degrees-of-Freedom¡± (with F. Brezzi), Computer Methods in Applied Mechanics and Engineering, Vol.72, 105-121(1989). ¡°On Mixed Finite Element Methods for Axisymmetric Shell Analysis¡± (with A.F.D. Louki, I. Miranda and L.P. Franca), Computer Methods in Applied Mechanics and Engineering, Vol.72, 201-231(1989). ¡°A Multi-element Group Preconditioned GMRES Algorithm for Nonsymmetric Systems Arising in Finite Element Analysis¡± (with F. Shakib and Z. Johan), ComputerMethodsinAppliedMechanicsandEngineering,Vol.75,415-456(1989). ¡°Extended Comparison of the Hilber-Hughes-Taylor Alpha Method and the Theta-1 Method¡± (with C. Hoff, G. Hulbert and P. J. Pahl), Computer Methods in Applied Mechanics and Engineering, Vol.76, 87-93(1989). ¡°New Directions in Computational Mechanics,¡± Nuclear Engineering and Design, Vol.114, 197-210(1989). ¡°Symmetrization of Conservation Laws with Entropy for High-temperature Hypersonic Computations¡± (with F. Chalot and F. Shakib), Computing Systems in Engineering, Vol.1, 495-521(1990). ¡°Design and Analysis of Finite Element Methods for the Helmholtz Equation in Exterior Domains¡± (with 1. Harari), Applied Mechanics Reviews, Vol.43(5), 2,366-373, ASME(1990). ¡°Space-Time Finite Element Methods for Second-Order Hyperbolic Equations¡± (with G.M. Hulbert), Computer Methods in Applied Mechanics and Engineering, Vol.84, 327-348(1990). ¡°A New Finite Element Formulation for Computational Fluid Dynamics: X. The Compressible Euler and Navier-Stokes Equations¡± (with Z. Johan and F. Shakib), ComputerMethodsinAppliedMechanicsandEngineering,Vol.89,141-219(1991). ¡°A Globally Convergent Matrix-Free Algorithm for Implicit Time-Marching Schemes Arising in Finite Element Analysis in Fluids¡± (with Z. Johan and F. Shakib),ComputerMethodsinAppliedMechanicsandEngineering,Vol.87,281-304(1991). ¡°The Finite Element Method with Lagrange Multipliers on the Boundary: Circumventing the Babuska-Brezzi Condition¡± (with H.J.C. Barbosa), Computer Methods in Applied Mechanics and Engineering, Vol.85, 109-128(1991). ¡°A New Finite Element Formulation for Computational Fluid Dynamics: IX. Fourier Analysis of Space-Time Galerkin/Least-Squares Algorithms¡± (with F. Shakib), Computer Methods in Applied Mechanics and Engineering, Vol.87, 35-58(1991). ¡°Finite Element Methods for the Helmholtz Equation in an Exterior Domain: Model Problems¡± (with I. Harari), Computer Methods in Applied Mechanics and Engineering, Vol.87, 59-96(1991). ¡°Galerkin/Least-Squares Finite Element Methods for the Reduced Wave Equation with Non-reflecting Boundary Conditions in Unbounded Domains¡± (with I. Harari), Computer Methods in Applied Mechanics and Engineering, Vol.98, 411-454(1992). ¡°Circumventing the Babuska-Brezzi Condition in Mixed Finite Element Approximations of Elliptic Variational Inequalities¡± (with H.J.C. Barbosa), Computer Methods in Applied Mechanics and Engineering,Vol.95,277-288(1992). ¡°Formulations of Finite Elasticity with Independent Rotations¡± (with J.C. Simo and D.D. Fox), Computer Methods in Applied Mechanics and Engineering, Vol.95, 277-288(1992). ¡°Stabilized Finite Element Methods: I. Application to the Advective-diffusive Model¡± (with L.P. Franca and S.L. Frey), Computer Methods in Applied Mechanics and Engineering, Vol.95, 253-276(1992). ¡°An Arbitrary Lagrangian-Eulerian Finite Element Method for Interaction of Fluid and a Rigid Body¡± (with T. Nomura), Computer Methods in Applied Mechanics and Engineering, Vol.95, 115-138(1992). ¡°What are C and h?: Inequalities for the Analysis and Design of Finite Element Methods¡± (with I. Harari), Computer Methods in Applied Mechanics and Engineering, Vol.97, 157-192(1992). ¡°A Cost Comparison of Boundary Element and Finite Element Methods for Problems of Time-harmonic Acoustics¡± (with I. Harari), Computer Methods in Applied Mechanics and Engineering, Vol.97, 77-102(1992). ¡°Analysis of Continuous Formulations Underlying the Computation of Time-Harmonic Acoustics in Exterior Domains¡± (with I. Harari), Computer Methods in Applied Mechanics and Engineering, Vol.97, 103-124(1992). ¡°A Data Parallel Finite Element Method for Computational Fluid Dynamics on the Connection Machine System¡± (with Z. Johan, K.K. Mathur and S.L. Johnsson), Computer Methods in Applied Mechanics and Engineering, Vol.99, 113-134(1992). ¡°Finite Element Methods in Wind Engineering¡± (with K. Jansen), Journal for Wind Engineering, Vol.52, 32-48(1992). ¡°Convergence Analyses of Galerkin/Least-Squares Methods for Symmetric Advective-diffusive Forms of the Stokes and Incompressible Navier-Stokes Equations¡± (with L.P. Franca), Computer Methods in Applied Mechanics and Engineering, Vol.105, 285-298(1993). ¡°Dynamic Analysis and Drilling Degrees of Freedom¡± (with I. Harari and A. Masud), International Journal for Numerical Methods in Engineering, Vol.38, 3193-3210(1995). ¡°Numerical Assessment of Some Membrane Elements With Drilling Degrees of Freedom¡± (with I. Harari and A. Masud), Computers and Structures, Vol.55, 297-314(1995). ¡°A Boundary Integral Modification of the Galerkin Least Squares Formulation for the Stokes Problem¡± (with J. J. Droux), Computer Methods in Applied Mechanics and Engineering, Vol.113, 173-182(1994). ¡°A Unified Approach to Compressible and Incompressible Flows¡± (with G. Hauke), Computer Methods in Applied Mechanics and Engineering, Vol.113, 389-395(1994). ¡°Boundary Lagrange Multipliers in Finite Element Methods: Error Analysis in Natural Norms¡± (with H.J.C. Barbosa), Numerische Mathematik, Vol.62, 1-15(1992). ¡°Implementation of a One-Equation Turbulence Model Within a Stabilized Finite Element Formulation of a Symmetric Advective-diffusive System¡± (with K. Jansen and Z. Johan), Computer Methods in Applied Mechanics and Engineering, Vol.105, 405-433(1993). ¡°A Consistent Equilibrium Chemistry Algorithm for Hypersonic Flows¡± (with F. Chalot), Computer Methods in Applied Mechanics and Engineering, Vol.112, 25-40(1994). ¡°A Matrix-Free Implicit Iterative Solver for Compressible Flow Problems¡± (with Z. Johan and F. Shakib), Rend. Sem. Mat. Univers. Politecn., Torino, Fascicolo Special(1991) Numerical Methods. ¡°An Efficient Communication Strategy for Finite Element Methods on the Connection Machine CM-5 System¡± (with Z. Johan, K. K. Mathur, and S. L. Johnsson), Computer Methods in Applied Mechanics and Engineering, Vol.113, 363-387(1994). ¡°Stabilized Finite Element Methods for Steady Advection-diffusion with Production¡± (with I. Harari), Computer Methods in Applied Mechanics and Engineering, Vol.115, 165-191(1994). ¡°Studies of Domain-based Formulations for Computing Exterior Problems of Acoustics¡± (with I. Harari), International Journal for Numerical Methods in Engineering, Vol.37, 2935-2950(1994). ¡°A Stabilized Finite Element Formulation for the Reynolds-averaged Navier-Stokes Equations¡± (with K. Jansen), Surveys in Mathematics for Industry, Vol.4, 279-317(1995). ¡°Scalability of Finite Element Applications on Distributed Memory Parallel Computers¡± (with Z. Johan, K. K. Mathur and S.L. Johnsson), Computer Methods in Applied Mechanics and Engineering, Vol.119, 61-72(1994). ¡°A Comparative Study of Different Sets of Variables for Solving Compressible and Incompressible Flows¡± (with G. Hauke), Computer Methods in Applied Mechanics and Engineering, Vol.153, 1-44(1998). ¡°A Space-Time Galerkin/Least-Squares Formulation of the Navier Stokes Equations for Moving Domain Problems¡± (with Arif Masud), Computer Methods in Applied Mechanics and Engineering, Vol.146, 91-126(1997). ¡°An A Posteriori Error Estimator and hp-Adaptive Strategy for Finite Element Discretizations of the Helmholtz Equation in Exterior Domains¡± (with J. Stewan), Finite Element Analysis and Design, Vol.25,1-26(1997). ¡°h-Adaptive Finite Element Computations of Time-Harmonic Exterior Acoustics Problems in Two Dimensions¡± (with J. Stewart), Computer Methods in Applied Mechanics and Engineering, Vol.146, 65-89(1997). ¡°A Case Study in Parallel Computation: Viscous Flow Around an ONERA M6 Wing¡± (with Z. Johan, K. Mathur and L. Johnsson), International Journal for Numerical Methods in Fluids, Vol.21, 877-884(1995). ¡°Computational Investigations in Vascular Disease¡± (with C.A. Taylor and C.K. Zarins), Computers in Physics, Vol.10, No.3, 224-232, May/June(1996). ¡°Recent Developments in Finite Element Methods for Structural Acoustics¡± (with I. Harari, K. Grosh, M. Malhotra, P.M. Pinsky, J.R. Stewart and L.L. Thompson), Archives of Computational Methods in Engineering, Vol.3, 131-309(1996). ¡°Explicit Residual-based A Posteriori Error Estimation for Finite Element Discretizations of the Helmholtz Equation: Computation of the Constant and New Measures of Error Estimator Quality¡± (with J. Stewart), Computer Methods in Applied Mechanics and Engineering, Vol.131, 335-363(1996). ¡°A Posteriori Error Estimation and Adaptive Finite Element Computation of the Helmholtz Equation in Exterior Domains¡± (with J. Stewart), Finite Element Analysis and Design, Vol.22, 15-24(1996). ¡°Multiscale Phenomena: Green's Functions, the Dirichlet-to-Neumann Formulation, Subgrid Scale Models, Bubbles, and the Origins of Stabilized Methods,¡± Computer Methods in Applied Mechanics and Engineering, Vol.127, 387-401(1995). ¡°A Space-time Formulation of Multiscale Phenomena¡± (with J. Stewart), JournalofComputationalandAppliedMathematics,Vol.74,217-229(1996). ¡°b = int g¡± (with F. Brezzi, L.P. Franca and A. Russo), Computer Methods in Applied Mechanics and Engineering, Vol.145, 329-339(1997). ¡°Consistent Finite Element Calculations of Boundary and Internal Fluxes¡± (with M. Oshima and K. Jansen), International Journal for Numerical Methods in Fluids, Vol.9, 227-235(1998). ¡°High Performance Parallel Computing in Industry¡± (with M. Eldredge, R. M. Ferencz, S. Rifai, A. Raefsky and B. Herndon), Parallel Computing, Vol.23, 1217-1233(1997). ¡°Finite Element Modeling of Blood Flow in Arteries¡± (with C.A. Taylor and C.K. Zarins) Computer Methods in Applied Mechanics and Engineering, Vol.158, 155-196(1998). ¡°A Study of Strain Localization in a Multiple Scale Framework: The One Dimensional Problem¡± (with K. Garikipati), Computer Methods in Applied Mechanics and Engineering, Vol.159, 193-222(1998). ¡°A Study of Strain Localization in a Multiple Scale Framework: The One Dimensional Problem¡± (with K. Garikipati), Computer Methods in Applied Mechanics and Engineering, Vol.159, 193-222(1998). ¡°A Tutorial in Elementary Finite Element Error Analysis: A Systematic Presentation of A Priori and A Posteriori Estimates¡± (with J. Stewart), Computer Methods in Applied Mechanics and Engineering, Vol.158, 1-22(1998). ¡°Finite Element Modeling of Three-dimensional Pulsatile Flow in an Idealized Abdominal Aorta: Relevance to Atherosclerosis¡± (with C.A. Taylor, D. Parker and C.K. Zarins), AnnalsofBiomedicalEngineering,Vol.26,No.6,975-987,November1998. ¡°The Variational Multiscale Method: A Paradigm for Computational Mechanics¡± (with G. Feijoo, L. Mazzei and J.-B. Quincy), Computer Methods in Applied Mechanics and Engineering, Vol.166, 3-24(1998). ¡°Embedding a Micromechanical Law in the Continuum Formulation: A Multiscale Approach Applied to Discontinuous Solutions¡± (with K. Garikipati), International Journal for Computational Civil and Structural Engineering, Vol.1, 64-78(2000). ¡°Multiphysics Simulation of Flow-induced Vibrations and Aeroelasticity on Parallel Computing Platforms¡± (with S.M. Rifai, Z. Johan, W.-P. Wang and R.M. Ferencz), Computer Methods in Applied Mechanics and Engineering, Vol.174, 393-417(1999). ¡°A Variational Multiscale Approach to Strain Localization ? Formulation for Multidimensional Problems¡± (with K. Garikipati), Computer Methods in Applied Mechanics and Engineering, Vol.188, 39-60(2000). ¡°Effect of Exercise on Hemodynamic Conditions in the Abdomininal Aorta¡± (with C.A. Taylor and C.K. Zarins), Journal of Vascular Surgery, Vol.29, 1077-1089(1999). ¡°Automotive Design Applications of Fluid Flow Simulation on Parallel Computing Platforms¡± (with S.M. Rifai, J.C. Buell and Z. Johan), Computer Methods in Applied Mechanics and Engineering, Vol.184, 449-466(2000). ¡°A Priori Error Analysis of a Finite Element Method with Residual-free Bubbles for Advecction Dominated Problems¡± (with F. Brezzi, D. Marini, A. Russo and E. Suli), SIAMJournalofNumericalAnalysis,Vol.36,1933-1948,October27,1999. ¡°Computational Procedures for Determining Structural Acoustic Response Due to Hydrodynamic Sources¡± (with A.A. Oberai and F. Roknaldin), Computer Methods in Applied Mechanics and Engineering, Vol.190, 345-361(2000). ¡°Large Eddy Simulation and the Variational Multiscale Method¡± (with L. Mazzei and K. Jansen), ComputingandVizualizationinScience,Vol.3,No.1/2,47-59(2000). ¡°The Continuous Galerkin Method is Locally Conservative¡± (with g. Engel, L. Mazzei and M. Larson), Journal of Computational Physics, Vol.163(2), 467-488, September20, 2000. ¡°On Modelling Thermal Oxidation of Silicon I: Theory¡± (with V.S. Rao), International Journal for Numerical Methods in Engineering, Vol.47, 341-358(2000). ¡°On Modelling Thermal Oxidation of Silicon II: Numerical Aspects¡± (with V.S. Rao and K. Garikipati), International Journal for Numerical Methods in Engineering, Vol.47, 359-377(2000). ¡°The Multiscale Formulation of Large Eddy Simulation: Decay of Homogeneous Isotropic Turbulence¡± (with L. Mazzei, A.A. Oberai and A. Wray), Physics of Fluids, Vol.13, No.2, 505-512(2001). ¡°Large Eddy Simulation of Turbulent Channel Flows by the Variational Multiscale Method¡± (with A.A. Oberai and L. Mazzei), Physics of Fluids, Vol.13, No.6, 1784-1799(2001). ¡°Variational Approximation of Flux in Conforming Finite Element Methods for Elliptic Partial Differential Equations: A Model Problem¡± (with F. Brezzi and E. Suli), Attidell¡¯ Accademia Nazionaledei Lincei,s.9, Vol.12, 167-183(2001). ¡°A One-dimensional Finite Element Method for Simulation-based Medical Planning for Cardiovascular Disease) (with J. Wan, B. Steele, S.A. Spicer, S. Strohband, G.R. Feijoo, and C.A. Taylor), Computer Methods in Biomechanics and Biomedical Engineering, Vol.5(3), 195-206(2002). A Stabilized Mixed Finite Element Method for Darcy Flow¡± (with A. Masud) Computer Methods in Applied Mechanics and Engineering, Vol.191, 4341-4370(2002). ¡°Computation of Trailing-edge Noise due to Turbulent Flow over an Airfoil (with A.A. Oberai and F. Roknaldin), AIAA Journal, 40(11), 2206-2216(2002). ¡°Quantification of Vessel Wall Cyclic Strain Using Cine Phase Contrast Magnetic Resonant Imaging¡± (with M.T. Draney, R.J. Herfkens, N.J. Pelc, C.K. Zarins, and C.A. Taylor), Annals of Biomedical Engineering, Vol.30, No.8, 1033-1045(2002). ¡°Continuous/Discontinuous Finite Element Approximations of Fourth-order Elliptic Problems in Structural and Continuum Mechanics with Applications to Thin Beams and Plates, and Strain Gradient Elasticity¡± (with G. Engel, K. Garikipati, M.G. Larson, L. Mazzei, and R.L. Taylor), Computer Methods in Applied Mechanics and Engineering, Vol.191, No.34, 3669-3750(2002). ¡°Calculation of Shear Stress in the Fourier-Galerkin Formulation of Turbulent Channel Flows: Projection, the Dirichlet Filter and Conservation¡± (with A.A. Oberai), JournalofComputationalPhysics,Vol.188,281-295(2003). ¡°In vivo Validation of a One-dimensional Finite Element Method for Predicting Blood Flow in Cardiovascular Bypass Grafts¡± (with B.N. Steele, J. Wan, J.P. Ku, and C.A. Taylor), IEEETransactionsonBiomedicalEngineering,Vol.50,No.6,649-656(2003). ¡°Research Directions in Computational Mechanics,¡± (with I. Babuska, T. Belytschko and J. T. Oden), Computer Methods in Applied Mechanics and Engineering, Vol.192, 913-922(2003). ¡°Sensitivity of the Scale Partition for Variational Multiscale LES of Channel Flow¡± (with J. Holmen, A.A. Oberai and G.N. Wells), Physics of Fluids, Vol.16, No.3, pp.824-827, 2004. ¡°Energy Transfers and Spectral Eddy Viscosity in Large Eddy Simulation of Homogeneous Isotropic Turbulence: Comparison of Dynamic Smagorinsky and Multiscale Models over a Range of Discretizations,¡± (with G.N. Wells and A.A. Wray) Physics of Fluids, Vol.16, No.11, pp.4044-4052, 2004. ¡°Mixed Discontinuous Galerkin Methods for Darcy Flow,¡± (with F. Brezzi, L. D. Martini and A. Masud), SIAM Journal of Scientific Computing, Vol. 22, No. 1, pp. 119-145, 2005. ¡°Conservation Properties for the Galerkin and Stabilized Forms of the Advection Diffusion and Incompressible Navier-Stokes Equations,¡± (with G. N. Wells), Computer Methods in Applied Mechanics and Engineering, Vol.194, pp.1141-1159, 2005. ¡°In Memorium: Professor John H. Argyris ? 19 August 1913 to 2 April 2004,¡± (with J.T. Oden and M. Papadrakakis), Computer Methods in Applied Mechanics and Engineering, Vol.193, Nos.36-38, pp.3763-3766, 2004. ¡°Isogeometric Analysis: CAD, Finite Elements, NURBS, Exact Geometry and Mesh Refinement,¡± (with J.A. Cottrell and Y. Bazilevs), Vol.194, Nos.39-41, pp.4135-4195, 2005. ¡°A Stabilized Mixed Discontinuous Galerkin Method for Darcy Flow,¡± (with A. Masud and J. Wan), Computer Methods in Applied Mechanics and Engineering, Vol.195, Nos.25-28, pp.3347-3381, 2006. ¡°A Multiscale Discontinuous Galerkin Method with the Computational Structure of the Continuous Galerkin Method,¡± (with G. Scovazzi, P. Bochev and A. Buffa), Computer Methods in Applied Mechanics and Engineering, Vol.195, Nos.19-22, pp.2761-2787, 2006. ¡°A Coupled Momentum Method for Modeling Blood Flow in Three-dimensional Deformable Arteries,¡± (with A. Figueroa, I. Vignon-Clementel, K.E. Jansen and C.A. Taylor), Computer Methods in Applied Mechanics and Engineering, Vol.195, Nos.41-43, pp.5685-5706, 2006. ¡°Isogeometric Analysis of Structures: k-refinement, Invariant Frequency Spectra, Nonlinear Parametrization, Rotationless Bending Elements, and Applicationtoan Exact Geometrical Model of the NASA Aluminum Testbed Cylinder, ¡±(withY.Bazilevs,J.A.CottrellandA.Reali), Computer Methods in Applied Mechanics and Engineering, Vol.195, Nos.41-43, pp.5257-5296, 2006. ¡°Isogeometric Fluid-structure Interaction Analysis with Applications to Arterial Blood Flow,¡± (with Y. Bazilevs, V.M. Calo and Y. Zhang), Computational Mechanics, Vol.38, Nos.4-5, pp.310-322, September 2006. ¡°Isogeometic analysis: approximation, stability and error estimates for h-refined meshes,¡± (with Y. Bazilevs, L. Beirao de Veiga, J.A. Cottrell, and G. Sangalli), Mathematical Models and Methods in Applied Sciences (M3AS), Vol.16, No.7, pp.1031-1090, July 2006. ¡°Analysis of a Multiscale Discontinuous Galerkin Method for Convection Diffusion Problems,¡± (with A. Buffa and G. Sangalli), SIAM Journal of Numerical Analysis, Vol.44, No.4, pp.1420-1440, 2006. ¡°Weak Imposition of Dirichlet Boundary Conditions in Fluid Mechanics,¡± (with Y. Bazilevs), Journal of Computers and Fluids, Vol.36, No.1, pp.12-26, 2007. ¡°Variational Multiscale Analysis: the Fine-scale Green¡¯s Function, Projection, Optimization, Localization, and Stabilized Methods,¡± (with G. Sangalli), SIAM Journal of Numerical Analysis, Vol.45, No.2, pp.539-557, 2007. ¡°Stabilized shock hydrodynamics: I. A Lagragian method,¡± (with G. Scovazzi, M.A. Christon, and J.N. Shadid), Computer Methods in Applied Mechanics and Engineering, Vol.196, Nos.4-6, pp.923-966, 2007. ¡°Patient-Specific Vascular NURBS Modeling for Isogeometric Analysis of Blood Flow,¡± (with Y.Zhang, Y. Bazilevs, S. Goswami, and C.L. Bajaj), Computer Methods in Applied Mechanics and Engineering, Vol.196, Nos.29-30, pp.2943-2959, 2007. ¡°YZbeta discontinuity-capturing for advection-dominated processes in arterial drug delivery,¡± (with Y.Bazilevs, V.M. Calo, T.E. Tezduyar), International Journal for Numerical Methods in Fluids, 54, pp.593-608, 2007. Studies of refinement and continuity in isogeometric structural analysis,¡± (with J.A. Cottrell and A. Reali), Computer Methods in Applied Mechanics and Engineering, Vol.196, Nos.41-44, pp.4160-4183, 2007. ¡°Weak Dirichlet boundary conditions for wall-bounded turbulent flows,¡± (with Y. Bazilevs, C. Michler, V.M. Calo), Computer Methods in Applied Mechanics and Engineering, Vol.196, 4853-4862, 2007. ¡°Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows,¡± (with Y. Bazilevs, V.M, Calo, J.A. Cottrell, A. Reali, and G. Scovazzi) Computer Methods in Applied Mechanics and Engineering, Vol.197, 173-201, 2007. ¡°The role of continuity in residual-based variational multiscale modeling of turbulence,¡± (with I. Akkerman, Y. Bazilevs, V.M. Calo, and S. Hulshoff), Computational Mechanics, Vol.41, 371-378, 2008. ¡°B-bar and F-bar Projection Methods for Nearly Incompressible Linear and Nonlinear Elasticity and Plasticity using Higher-order NURBS Elements,¡± (with T. Elguedj, Y. Bazilevs, and V. Calo), Computer Methods in Applied Mechanics and Engineering, Vol.197, 2732-2762, 2008. ¡°Isogeometric Analysis of the Cahn-Hilliard phase-field model,¡± (with H. Gomez, V.M. Calo and Y. Bazilevs), Computer Methods in Applied Mechanics and Engineering, published online, 2008. ¡°Isogeometric Analysis using T-Splines,¡± (with Y. Bazilevs, V.M. Calo, J.A. Cottrell, J. Evans, S. Lipton, M.A. Scott, and T.W. Sederberg), Computer Methods in Applied Mechanics and Engineering, inreview. ¡°Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device¡±, (with Y. Bazilevs, J.R. Gohean, R.D. Moser, and Y. Zhang), Computer Methods in Applied Mechanics and Engineering, inreview, 2008. ¡°N-widths, sup-infs, and optimality ratios for the k-version of the isogeometric finite element method¡±, (with J.A. Evans, Y. Bazilevs, I. Babuska), Computer Methods in Applied Mechanics and Engineering, inreview, 2008. ¡°Improving stability of multiscale formulations of fluid flow at small time steps¡±, (with M.C. Hsu, Y. Bazilevs, V.M. Calo, T.E. Tezduyar), Computer Methods in Applied Mechanics and Engineering, inreview 2008. ¡°Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly-enforced boundary conditions on unstretched meshes¡±, (Y. Bazilevs, C. Michler, and V.M. Calo), Computer Methods in Applied Mechanics and Engineering, accepted for publication, 2008. ¡°NURBS-based Isogeometric Analysis for the Computation of Flows about Rotating Components,¡± (with Y. Bazilevs), Computational Mechanics, accepted for publication, 2008. ¡°A multiphysics model for blood flow and drug transport with application to patient-specific coronary artery flow,¡± (with V.M. Calo, N. Brasher, and Y. Bazilevs), Computational Mechanics, accepted forpublication, 2008. ¡°Isogeometric fluid-structure interaction: Theory, algorithms and computations,¡± (with Y. Bazilevs, V.M. Calo, and Y. Zhang), Computational Mechanics, accepted for publication, 2008. ¡°Duality and Unified Analysis of Discrete Approximations in Structural Dynamics and Wave Propagation: Comparison of p-method Finite Elements with k-method NURBS,¡± (with A. Reali and G. Sangalli), Computer Methods in Applied Mechanics and Engineering, accepted for publication, 2008. ¡°Stabilized methods for compressible flows,¡± (with G. Scovazzi and T.E. Tezduyar), Journal of Scientific Computing, accepted for publication, 2008. ¡°Augmented Lagrangian Method for Constraining the Shape of Velocity Profiles at Outlet Boundaries for Three-Dimensional Finite Element Simulations of Blood Flow,¡± (with H.J. Kim, C.A. Figueroa, K.E. Jansen, and C.A. Taylor), Computer Methods in Applied Mechanics and Engineering, in review, 2008. ¡°Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly-enforced boundary conditions on unstretched meshes¡±, (with Y. Bazilevs, C. Michler and V.M. Calo), Computer Methods in Applied Mechanics and Engineering, accepted for publication, 2008. ¡°Efficient Quadrature for NURBS-based Isogeometric Analysis,¡± (with A. Reali and G. Sangalli), ComputerMethodsinAppliedMechanicsandEngineering,inreview,2008.     Refereed Conference Proceedings ¡°Finite Elements for Compressible and Incompressible Continua¡± (with H. Allik), pp. 27-62 in Proceedings, Symposium on Application of Finite Element Methods in Civil Engineering, Vanderbilt University, Nashville, Tennessee, November 1969. ¡°Reduced Finite Element Systems in Dynamics which Retain Full Rate of Convergence¡± (with R. L. Taylor and H. M. Hilber), Paper Ml/9, Transactions, Third International Conference on Structural Mechanics in Reactor Technology, London, September 1975. ¡°Finite Element Formulation and Solution of a Class of Contact-Impact Problems in Continuum Mechanics¡± (with R. L. Taylor, J. L. Sackman, A. Curnier and W. Kanoknukulchai), Transactions, Third International Conference on Structural Mechanics in Reactor Technology, London, September 1975. ¡°A Finite Element Method for Incompressible Viscous Flows¡± (with R. L. Taylor and J. F. Levy), pp. 1-15 in Proceedings, Second International Symposium on Finite Element Methods in Flow Problems, Rapallo, Italy, June 1976. ¡°Concepts of Numerical Stability in Linear and Nonlinear Dynamic Finite Element Analysis¡± (with T. K. Caughey) pp. 895-897 in Proceedings, Fourteenth Annual Meeting of the Society of Engineering Science, Lehigh University, Bethlehem, Pennsylvania, November 1977. ¡°On the Equivalence of Mixed Finite Element Methods with Reduced/Selective Integration Displacement Models¡± (with D. S. Malkus), pp. 23-32, Proceedings of the Symposium on Applications of Computer Methods in Engineering, Vol. 1, University of Southern California, Los Angeles, California, August 1977. ¡°Reduced and Selective Integration Techniques in Finite Element Analysis: Two Examples¡±, pp. 35-36 in Developments in Mechanics, Vol. 8, Proceedings of the Midwestern Mechanics Conference, University of Illinois at Chicago Circle, Chicago, Illinois, March 1977. ¡°Impact-Release Conditions in Dynamic Contact Problems,¡± pp. 40-42, Proceedings of the Workshop on Nonlinear Waves in Solids, University of Illinois at Chicago Circle, Chicago, Illinois, March 1977. ¡°Step-by-Step Integration in Linear Structural Dynamics with Particular Reference to Collocation and 'Overshoot'¡° (with H. M. Hilber), pp. 1043-1044, Proceedings of the Sixth Canadian Congress of Applied Mechanics, Vancouver, British Columbia, June 1977. ¡°Modification of Newmark's Algorithm to Achieve Effective Numerical Dissipation¡± (with H. M. Hilber), Paper M5/4, Transactions, Fourth International Conference on Structural Mechanics in Reactor Technology, San Francisco, California, August 1977. ¡°A New Finite Element for Plate Bending Analysis¡± ( with R. L. Taylor), Paper M2/1, Transactions, Fourth International Conference on Structural Mechanics in Reactor Technology, San Francisco, California, August 1977. ¡°Viscoplastic Finite Element Analysis by Unconditionally Stable Implicit Methods¡± (with R. L. Taylor), Paper M5/5, Transactions, Fourth International Conference on Structural Mechanics in Reactor Technology, San Francisco, California, August 1977. ¡°Stability of One-Step Methods in Transient Nonlinear Heat Condition,¡± Paper B2/10, Transactions, Fourth International Conference on Structural Mechanics in Reactor Technology, San Francisco, California, August 1977. ¡°Mathematical Modeling of Cyclic Soil Behavior¡± (with J. H. Prevost) pp. 746-761 in Proceedings, ASCE Geotechnical Engineering Specialty Conference, Pasadena, California, June 1978. ¡°Analysis of Gravity Offshore Structure Foundations Subjected to Cyclic Wave Loading¡± (with J. H. Prevost), pp. 1809-1818 in Proceedings of the 10th Annual Offshore Technology Conference, Houston, Texas, May 1978. ¡°A Variational Basis for 'Upwind' Finite Elements¡± (with J. Atkinson), Proceedings of the IUTAM Symposium on Variational Methods in the Mechanics of Solids, (ed. S. Nemat-Nasser), Pergamon Press, pp. 387-391, 1980. ¡°The 'Heterosis' Family of Plate Finite Elements¡± (with M. Cohen), pp. 608-617, Proceedings of the Seventh Conference on Electronic Computation, Washington University, St. Louis, Missouri, August 6-8, 1979. ¡°Finite Element Methods for Fluids and Fluid-Structure Interaction,¡± pp. 19-27, Preprints of the First International Seminar of Fluid-Structure Interaction in LWR Systems, Berlin, Germany, August 20-21, 1979. ¡°Arbitrary Lagrangian-Eulerian Finite Element Descriptions with Particular Reference to Incompressible Viscous Flows¡± (with W. K. Liu and T. K. Zimmermann), Fifth International Conference on Structural Mechanics in Reactor Technology, Berlin, Germany, August 13-17, 1979. ¡°Selective Integration Techniques for the Analysis of General Nonlinear Media¡± (with W. K. Liu), Proceedings of the Society of Engineering Science Annual Meeting, Northwestern University, Evanston, Illinois, September 5-7, 1979. ¡°Finite Element Procedures for Modeling Fluid-Structures Interaction,¡± Proceedings of the Third Engineering Mechanics Division Specialty Conference, Austin, Texas, September 17-19, 1979. ¡°Solution of the Navier-Stokes Equations by the Finite Element/Penalty Function Formulation,¡± Second International Conference on Computational Methods in Nonlinear Mechanics, University of Texas, Austin, March 26-30, 1979. ¡°Streamline-Upwind/Petrov-Galerkin Methods for Advection Dominated Flows¡± (with A. Brooks), pp. 283-292, Proceedings for the Third International Conference on Finite Element Methods in Fluid Flow, Banff, June 1980. ¡°Finite Element Methods for Convection Dominated Phenomena with Special Emphasis on the Navier-Stokes Equation,¡± Third International Conference on Finite Elements in Water Resources, University of Mississippi, Oxford, May 1980. ¡°Nonlinear Dynamic Finite Element Analysis of Shells¡± (with W. K. Liu and I. Levit), Europe - U.S. Workshop on Nonlinear Finite Element Analysis Structural Mechanics, Ruhr - University, Bochum, W. Germany, July 28-31, 1980. Proceedings (eds. W. Wunderlich et al), 151-168, Springer-Verlag, 1981. ¡°Streamline Upwind Formulations for Advection-Diffusion, Navier-Stokes, and First-Order Hyperbolic Equations¡± (with T. E. Tezduyar and A. Brooks), pp. 97-104 in Proceedings of the Fourth International Conference of Finite Element Methods in Fluid Flow, Tokyo, July 1982. ¡°Finite Element Methods for the Incompressible Navier-Stokes Equations and the Compressible Euler Equations¡± (with T. E. Tezduyar and A. N. Brooks), Proceedings of the 6th Invitational Symposium on the Unification of Finite Elements, Finite Differences and Calculus of Variations (ed. H. Kardestuncer), 153-178, University of Connecticut, Storrs, May 7, 1982. ¡°Finite Element Formulation for Convection Dominated Flows with Particular Emphasis on the Compressible Euler Equations¡± (with T. E. Tezduyar), AIAA Paper No. 83-0125, AIAA 21st Aerospace Sciences Meeting, Reno, Nevada, Jan. 10-13, 1983. ¡°Auxiliary Convergence Criteria for Mindlin Plate Elements and their Application to the Four-Node Quadrilateral Element¡± (with A. Tessler), Proceedings of the 24th Structural Dynamics and Materials Conference, Part 1, AIAA CP 831, pp. 154-160, Lake Tahoe, California 1983. ¡°Element-by-Element and Subdomain Strategies for Solving the Discrete Helmholtz Poisson Problem Arising in the Finite element Analysis of Incompressible Viscous Flows¡± (with A. Raefsky), pp. 273-274, Proceedings of the Fifth International Symposium on Finite Elements and Flow Problems, University of Texas, Austin, January 23-26, 1984. ¡°Finite Element Analysis of the Incompressible Navier-Stokes Equations: A Synopsis of the Streamline-Upwind Petrov-Galerkin Formulations,¡± Proceedings of FEMSA '85, University of Stellenbosch, South Africa, February 5-8, 1985. ¡°A Shock-Capturing Finite Element Method,¡± pp. 519-534 in Proceedings of the 6th International Conference on Computing Methods in Applied Sciences and Engineering, Versailles, December 12-16, 1983, North-Holland, 1984. ¡°A Progress Report on EBE Solution Procedures in Solid Mechanics¡± (with A. Raefsky, A. Muller, J. M. Winget, and I. Levit), pp. 18-26 in Proceedings, Second International Conference on Numerical Methods for Nonlinear Problems, Barcelona, Spain, April 9-13, 1984, Pineridge Press, Swansea. ¡°Element-by-Element Algorithms for Heat Transfer Analysis of Structures¡± (with J. M. Winget), A1AA 19th Thermophysics Conference Paper, Snowmass, Colorado, June 25-27, 1984. ¡°Augmented Weak Forms and Element-by-Element Preconditioners: Efficient Iterative Strategies for Structural Finite Elements - A Preliminary Study¡± (with A. Muller), Symposium on Advances and Trends in Structural Dynamics , Arlington, Virginia, October 22-25, 1984, pp. 95-100, Research in Structures and Dynamics - 1984, NASA Conference Publication 2335. ¡°Experience with an Element-by-Element Iterative Strategy for Solid Mechanics on a CRAY X-MP/48¡± (with R.M. Ferencz and J.O. Hallquist), Workshop on Scientific Applications and Algorithm Design for High Speed Computing, April 7-10, 1986, National Center for Supercomputing Applications, Champaign, Illinois. See pp. 180-195 in High Speed Computing (ed. R.B. Wilhelmson), Academic Press. ¡°Large-Scale Vectorized Implicit Calculations in Solid Mechanics on a CRAY X-MP/48 Utilizing EBE Preconditioned Conjugate Gradients¡± (with R. M. Ferencz and J. 0. Hallquist) Proceedings of Symposium on Future Directions of Computational Mechanics (ed. A. Noor), ASME Winter Annual Meeting, Anaheim, December 10-11, 1986. ¡°Finite Element Methods for High-Speed Flows: Consistent Calculations of Boundary Flux¡± (with L. P. Franca, M. Mallet, F. Shakib and T. E. Spelce), AIAA Aerospace Sciences Meeting, Paper No. 87-0556, Reno, Nevada, January 11-15, 1987. ¡°A Successful Mixed Formulation for Axisymmetric Shell Analysis Employing Discontinuous Stress Fields of the Same Order as the Displacement Field¡± (with A. F. D. Loula, I. Miranda, and L. P. Franca) pp. 581-599 in Proceedings of the Fourth Brazilian Symposium on Piping and Pressure Vessels, Salvador, Brazil, October 1986. ¡°Fully Vectorized EBE Preconditioners for Nonlinear Solid Mechanics: Applications to Large-Scale Three-Dimensional Continuum, Shell and Contact/Impact Problems¡± (with R. M. Ferencz), pp. 261-280 in Proceedings of the First International Symposium on Domain Decomposition Methods for Partial Differential Equations, Paris. France, January 7-9, 1987. Published by SIAM, Philadelphia. ¡°Implicit Solutions of Large-scale Contact and Impact Problems Employing an EBE Preconditioned Iterative Solver¡± (with R. M. Ferencz), Proceedings of IMPACT 87, International Conference on Effects of Fast Transient Loading in the Context of Structural Mechanics, Lausanne, Switzerland, August 26-27, 1987. ¡°Computational Aerodynamics and the Finite Element Method¡± (with F. Shakib), AIAA Aerospace Sciences Meeting, Paper No. 88-0031, Reno, Nevada, January 11-15, 1988. ¡°Element-by-Element Algorithms for Nonsymmetric Matrix Problems Arising in Fluids¡± (with F. Shakib and Z. Johan), Proceedings of the Symposium on the Solution of Super-Large Problems in Computational Mechanics, October 18-19, 1988, Mystic, Connecticut, Plenum, New York, 1989. ¡°Compressible Flow Calculations Employing the Galerkin/Least-Squares Method¡± (with F. Shakib and Z. Johan), pp. 331-338 in Proceedings of the FEMIF 7th Meeting, University of Alabama, Huntsville, April 2-7, 1989. ¡°Galerkin/Least-Squares Procedures in Computational Fluid Dynamics,¡± Proceedings of the FEMIF 7th Meeting, University of Alabama, Huntsville, April 2-7, 1989. ¡°The Stokes Problem with Various Well-Posed Boundary Conditions: Symmetric Formulations that Converge for All Velocity/Pressure Spaces¡± (with L.P. Franca), Proceedings of the FEMIF 7th Meeting, University of Alabama, Huntsville, April 2-7, 1989. ¡°A New Family of Stable Elements for the Stokes Problem Based on a Mixed Galerkin/Least-Squares Finite Element Formulation¡± (with L.P. Franca, A. Loula and I. Miranda), Proceedings of the FEMIF 7th Meeting, University of Alabama, Huntsville, April 2-7, 1989. ¡°Galerkin/Least-Squares Finite Element Formulations for the Stokes Flow Problem¡± (with L.P. Franca), Proceedings of the Fifth International Symposium on Numerical Methods in Engineering, Lausanne, Switzerland, September 11-15, 1989. ¡°Finite Element Approximations of the Stokes Flow Problem Based Upon Various Variational Principles,¡± (with L.P. Franca and R. Stenberg), Proceedings of Reliability of Finite Element Methods, Swansea, U.K. September 1989. ¡°Finite Element Approximations of the Stokes Flow Problem Based Upon Various Variational Principles¡± (with L.P. Franca and R. Stenberg), pp. 85-96 in Numerical Methods in Laminar and Turbulent Flow, Vol. 6, Part 1 (eds. C. Taylor, P. Gresho, R. L. Sani and J. Hausen), Proceedings of the Sixth International Conference on Numerical Methods in Laminar and Turbulent Flow, Swansea, U.K., July 11-15,1989. ¡°Finite Elements with Drilling Degrees of Freedom: Theory and Numerical Evaluations¡± (with F. Brezzi, A. Masud and I. Harari), pp. 3-17 in Proceedings of the Fifth International Symposium on Numerical Methods in Engineering, Vol. 1 (eds. R. Gruber, J. Periaux and R.P. Shaw). Springer-Verlag, Berlin, 1989. ¡°Calculation of Two-dimensional Compressible Euler Flows with a New Petrov-Galerkin Finite Element Method¡± (with L.P. Franca, F.L. Chalot, I. Harari, F. Shakib, M. Mallet, J. Periaux, and B. Stoufflet), Numerical Simulation of Compressible Euler Flows, A GAMM Workshop (eds. A. Dervieux, B. Van Leer, J. Periaux, and A. Rizzi), Notes on Numerical Fluid Mechanics, Vieweg, Braunschweig, Vol. 26, 88-104 (1989). ¡°Application of the Galerkin/Least-Squares Formulation to the Analysis of Hypersonic Flows: 1. Flow Over a Two-dimensional Ramp¡± (with F. Chalot, Z. Johan and F. Shakib), pp. 181-200 in Hypersonic Flows for Reentry Problems, Vol. II: Test Cases ? Experiments and Computations, Proceedings of the Workshop on Hypersonic Flows for Reentry Problems, Antibes, France, January 22-25, 1990 (eds., J.-A. Desideri, R. Glowinski and J. Periaux), Springer-Verlag, Berlin-Heidelberg, 1991. ¡°Application of the Galerkin/Least-Squares Formulation to the Analysis of Hypersonic Flows: 2. Flow Past a Double Ellipse¡± (with F. Chalot, Z. Johan and F. Shakib), pp. 427-450 in Hypersonic Flows for Reentry Problems, Vol. II: Test Cases ? Experiments and Computations, Proceedings of the Workshop on Hypersonic Flows for Reentry Problems, Antibes, France, January 22-25, 1990 (eds., J.-A. Desideri, R. Glowinski and J. Periaux), Springer-Verlag, Berlin-Heidelberg,1991. ¡°A Globally Convergent Matrix-Free Algorithm for Implicit Time-Marching Schemes Arising in Finite Element Analysis in Fluids¡± (with Z. Johan and F. Shakib), pp. 992-1009 in Third International Conference on Hyperbolic Problems Theory, Numerical Methods and Applications, Vol. 2 (eds. B. Engquist and B. Gustafsson), Studentlitteratur, Lund (1991). ¡°On Stabilized Methods for the Advective-diffusive Model¡± (with L.P. Franca and S.L. Frey), pp. 609-620 in Proceedings of 10th International Conference on Computing Methods in Applied Sciences and Engineering (ed. R. Glowinski), Nova Science Publishers, New York, 1991. ¡°Stabilized Finite Element Methods for the Advective-diffusive Problem¡± (with L.P. Franca and S. Frey), pp. 97-100 in Proceedings of the 11th ABCM Mechanical Engineering Conference, SaoPaulo, Brazil, 1991. ¡°Analysis of Hypersonic Flows in Thermochemical Equilibrium by Application of the Galerkin/Least-Squares Formulation¡± (with F.L. Chalot), pp. 146-159 in 1CIAM 91, Proceedings of the Second International Conference on Industrial and Applied Mathematics, (ed. R. E. O'Malley, Jr.), SIAM, Philadelphia, 1991. ¡°A Unified Approach to Compressible and Incompressible Flows¡± (with G. Hauke), pp. 31-40 in Metodes Numericos en Ingenieria, Volumen 1 (eds. F. Navamna and M. Casteleiro), SEMNI, Barcelona, 1993. ¡°New Perspectives and Possibilities within the Field of FEM,¡± pp. 227-235 in Proceedings of the 22nd International FEM Congress, 1KOSS, Stuttgart, 1993. ¡°Massively Parallel Computing: Unstructured Finite Element Simulations¡± (with Z. Johan, K. K. Mathur and S. L. Johnsson), Proceedings of the NAFEM 4th International Conference on Quality Assurance and Standards on Finite Element and Associated Technologies, Brighton, England, May 26-28, 1993. ¡°Adaptive Finite Element Methods for The Helmholtz Equation in Exterior Domains¡± (with J. Stewart), pp. 122-142 in Large-Scale Structures in Acoustics and Electromagnetism, Proceedings of a Symposium, National Academy Press, Washington, DC, 1996. ¡°Multiscale Phenomena: Green's Functions, Subgrid Scale Models, Bubbles and the Origins of Stabilized Methods,¡± pp. 99-114 in Proceedings of the Ninth Internatonal Conference on Finite Elements in Fluids ? New Trends and Applications (eds. M. Morandi-Cecchi, K. Morgan, J. Periaux, B.A. Schrefler and O.C. Zienkiewicz), SM Liguria, Padova, Italy, 1995. ¡°Stabilization Techniques and Subgrid Scales Capturing¡± (with F. Brezzi, L.P. Franca and A. Russo), pp. 391-406 in The State of the Art in Numerical Analysis (based on the Proceedings of the 3rd Congress on Numerical Analysis, York, England, 1996), IMA Conference Series, Vol. 63 (I.S. Duff and G.A. Watson, eds.), Oxford University Press. ¡°Multiphysics Simulation of Turbomachinery Applications Using Smart Structures¡± (with W.-P. Wang and S.M. Rifai), A1AA Paper No. 99-0368, 37th A1AA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, January 11-14, 1999. ¡°The Variational Multiscale Formulation of LES: Channel Flow at Re=590¡± (with A.A. Oberai), AIAA 2002-1056, 40th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, January14-17, 2002. ¡°In vivo Validation of a One-dimensional Finite Element Method for Simulation-based Medical Planning for Cardiovascular Bypass Surgery¡± (with B.N. Steele, J. Wan, J.P. Ku and C.A. Taylor), Proceedings of the 23d Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Istanbul, Turkey, 2002. ¡°Stabilized Finite Element Methods for Coupled Geomechanics ? Reservoir Flow Simulations (with J. Wan, A. Aziz, L.J. Durlofsky), Society of Petroleum Engineers paper SPE 79694, SPE Reservoir Simulation Symposium, Houston, TX, February 3-5, 2003. ¡°A Coupled Momentum Method to Model Blood Flow in Deformable Arteries,¡± (with A. Figueroa, K. E. Jansen and C. A. Taylor), Proceedings of the 6th World Congress on Computational Mechanics (WCCMVI), Beijing, China, Sept. 5-10, 2004. ¡°Variational and Multiscale Methods in Turbulence,¡± (with V. Calo and G. Scovazzi), Proceedings of the 21st International Congress of Theoretical and Applied Mechanics, Kluwer Academic Publishers, inpress. ¡°Isogeometric Analysis,¡± (with J.A. Cottrell and Y. Bazilevs), Coupled Problems 2005: Computational Methods for Coupled Problems in Science and Engineering, Santorini Island, Greece, May 25-28, 2005. ¡°Isogeometric Structural Analysis,¡± (with J.A. Cottrell and Y. Bazilevs), 5thInternationalConferenceonComputationofShellandSpatialStructures,Salzburg,Austria,June1-4,2005. ¡°Patient-Specific Vascular NURBS Modeling for Isogeometric Analysis of Blood Flow,¡± (with Y. Zhang, Y. Bazilevs, S. Goswami, and C.L. Bajaj), Proceedings of the 15thInternationalMeshingRoundtable,pp.73-92,2006. ¡°Isogeometric modeling and analysis for naval ship structures,¡± (with Y. Bazilevs, V.M. Calo, J.A. Cottrell, and Y. Zhang), Marine 2007, Barcelona, Spain, June 5-7, 2007. ¡°A fully integrated approach to fluid-structure interaction,¡± (with Y. Bazilevs, V.M. Calo and Y. Zhang), Coupled Problems, Ibiza, Spain, May 21-23, 2007. ¡°Isogeometric analysis of blood flow: a NURBS-based approach,¡± (with Y. Bazilevs, Y. Zhang, V. Calo, S. Goswami, and C. Bajaj), CompIMAGE, Coimbra, Portugal, October 20-21, 2006. ¡°Patient-specific heart models from high resolution CT,¡± (with C. Bajaj, S. Goswami, Z. Yu, Y. Zhang, and Y. Bazilevs), CompIMAGE, Coimbra, Portugal, October 20-21, 2006. ¡°Isogeometric Discretizations in Structural Dynamics and Earthquake Engineering,¡± (with J. A. Cottrell, A. Reali and G. Sangalli), ECCOMAS Thematic Conference and Computational Methods in Structural Dynamics and Earthquake Engineering, Rythmno, Crete, Greece, June 13-16, 2007. ¡°Variational multiscale residual-driven turbulence modeling for large eddy simulation of incompressible flows¡±, (with Y. Bazilevs, V.M. Calo, J.A. Cottrell, A. Reali, and G. Scovazzi), ECCOMAS Thematic Conference on Multiscale Computational Methods for Solids and Fluids, Cachan, France, November 28-30, 2007. ¡°Isogeometric Analysis: Progress and Challenges,¡± Proceeding of the Computational Engineering Conference, Japan Society of Computational Engineering and Science (JSCES), Vol. 13, pp. 1-3, May 2008. ¡°Modeling and computation of patient-specific vascular fluid-structure interaction using Isogeometric Analysis,¡± (with Y. Bazilevs, V.M. Calo, and Y. Zhang), 6th International Conference on Computation of Shells and Spatial Structures, Cornell University, Ithaca, NY, May 28-31, 2008. ¡°Preliminary Results for an Isogeometric Shell,¡± (with D.J. Benson, and Y. Bazilevs), 10th International LS-DYNA Users Conference, Dearborn, MI, USA, June 8-10, 2008. ¡°F-bar projection method for finite deformation elasticity and plasticity using NURBS-based isogeometric analysis,¡± (with T. Elguedj, Y. Bazilevs, and V.M. Calo), ESAFORM2008, Lyon, France, April 23-25, 2008. ¡°Simulation of Engineering Applications Using Isogeometric Analysis,¡± (with V.M. Calo, H. Gomez, Y. Bazilevs, and G.P. Johnson), TeraGrid 08, Las Vegas, Nevada, June 9-13, 2008 ¡°Isogeometric Analysis: Toward unification of CAD and FEA,¡± (with Y. Bazilevs, V.M. Calo, J.A. Cottrell, J. Evans, S. Lipton, M.A. Scott, and T.W. Sederberg), 6th International Conference on Engineering Computational Technology, Athens, Greece, September 2-5, 2008.    Books (Authored/Co-Authored, Edited/Co-Edited) Short Course in Fluid Mechanics (with J. Marsden), Publish or Perish Press, Boston, 1976. Finite Element Methods for Convection Dominated Flows (editor), AMD Vol. 34, ASME, New York, 1979. New Concepts in Finite Element Analysis (editor), AMD Vol. 44, ASME, New York, 1981. Nonlinear Finite Element Analysis of Plates and Shells (editor), AMD Vol. 48, ASME, New York, 1981. Computational Methods in Transient Analysis (editor, with T. Belytschko), North-Holland Publishing, Amsterdam, 1983. Mathematical Foundations of Elasticity (with J. Marsden), Prentice-Hall, Englewood Cliffs, New Jersey, 1983. Reprint 1983, Dover, New York. Finite Element Methods for Fluid Dynamics and Nonsymmetric Operator Problems (editor). Special Volume of Computer Methods in Applied Mechanics and Engineering, Vol.45. Nos.1-3, September 1984. Finite Element Methods for Plate and Shell Structures, Vol. 1, Element Technology (editor, with E. Hinton), Pineridge Press, Swansea, U.K., 1986. Finite Element Methods for Plate and Shell Structures, Vol. 2, Formulations and Algorithms (editor, with E. Hinton), Pineridge Press, Swansea, U.K., 1986. Numerical Methods for Compressible Flows -- Finite Difference, Element and Volume Techniques (editor, with T. E. Tezduyar), AMD Vol. 78, ASME, New York, 1986. The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Prentice-Hall, Englewood Cliffs, New Jersey, 1987. Recent Developments in Computational Fluid Dynamics, (editor, with T. E. Tezduyar), AMD Vol. 95, ASME, New York, 1988. Solution Manual for: The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, by Thomas J.R. Hughes, Prentice-Hall, Englewood Cliffs, New Jersey, 1987 (with I. Harari, G.M. Hulbert, and R.M. Ferencz ), 1989. Stabilized Methods in Computational Fluid Dynamics (with L.P.Franca,Z.Johan and F.L.Chalot), inpreparation. Recent Developments in Large-Scale Computational Fluid Dynamics (editor, with T. E. Tezduyar), Special Issues of Computer Methods in Applied Mechanics and Engineering, Vol.87, Nos.2-3, North-Holl and ,Amsterdam(1991). Finite Element Methods in Large-Scale Computational Fluid Dynamics (editor, with T. E. Tezduyar and M. Kawahara), Special Volume of Computer Methods in Applied Mechanics and Engineering, Vol.112, Nos.1-4, February 1994. Recent Developments in Finite Element Analysis. A Book Dedicated to Robert L. Taylor (editor, with E. Onate and 0. C. Zienkiewicz), International Center for Numerical Methods in Engineering, Barcelona, Spain, 1994. Finite Element Methods in Large-Scale Computational Fluid Dynamics (editor, with T. E. Tezduyar and M. Kawahara), Special Issue of International Journal for Numerical Methods in Fluids, Vol. 21, No. 10, Wiley (1995). Parallel Computing Methods in Applied Fluid Mechanics (editor, with T.E. Tezduyar), Special Issue of Parallel Computing, Vol.23, No.9, North-Holl and, Amsterdam(1997). Computational Inelasticity (with J.C. Simo), Springer-Verlag, New York, 1998. The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Dover, Mineola, New York, 2000 (reprint of 1987 Prentice-Hall edition). Special Section on Flow Simulation and Modeling, (editor, With T. E. Tezduyar),JournalofAppliedMechanics,Vol.70,No.1,January2003. Encyclopedia of Computational Mechanics, (editor, with E. Stein and R. de Borst), Wiley, Chichester, U.K., Dec. 2004. Computational Fluid Dynamics, Vol. III, Encyclopedia of Computational Mechanics, (volume editor), Wiley, Chichester, U.K., 2004. Flow Simulation and Modeling, (editor, with T. E. Tezduyar), Special Issue of ComputerMethodsinAppliedMechanicsandEngineering,Vol.913,Nos.21-22,Elsevier,Lausanne,Switzerland,2004. ¡°John H. Argyris Memorial Issue,¡± (editor, with J.T. Oden and M. Papdrakakis), ComputerMethodsinAppliedMechanicsandEngineering,Vol.195,Nos.37-40,III-IV,2006. ¡°John H. Argyris Memorial Issue Part II,¡± (editor, with J.T. Oden and M. Papdrakakis), Computer Methods in Applied Mechanics and Engineering, Vol.195, Nos.37-40, V-VII, 2006. ¡°Challenges and Advances in Flow Simulation and Modeling,¡± (editor, with T.E. Tezduyar, Y. Matsumoto and M. Haflz), Vol. 36, No. 1, Computers and Fluids (specialissue), Elsevier, 2007.    Patents/Copyrighted Software ¡°Method for Predictive Modeling for Planning Medical Interventions and Simulating Physiological Conditions¡± (with C.A. Taylor and C.K. Zarins), Patent No. US 6,236,878 B1, May 22, 2001.   <- back   Faculty  Full Time Professors  Research Professor  Invited Professor  Professor Emeritus  Visiting Emeritus  Adjunct Professor   Staff