 |
| Lee, Joo Sung |
Ph.D., University of Glasgow (U.K.), 89 / MS, BS, Seoul National Univ., 78 /Reliability, Manufacturing /
jslee2@ulsan.ac.kr |
|
 |
| |
|
Position : Professor
Research area: : Structure Design and Manufacturing
Location : #18-623, Building 18
Telephone : +82-52-259-2162
Fax : +82-52-259-2836
Email : jslee2@mail.ulsan.ac.kr
Homepage: http://home.ulsan.ac.kr/user/jslee1/index.html
|
| |
| Research interests |
|
|
Reliability analysis and its based design of marine structure
Formal safety assessment of marine structures
Thermo-deformation control of ship¡¯s block assembly
Automation system for plate forming
Production-oriented ship structural design
|
| |
| Brief career history |
|
|
1978 BEng Naval Architecture, Seoul National University
1980 MSc Naval Architecture, Seoul National University
1989 PhD Naval Architecture & Ocean Engineering, University of Glasgow, U.K.
1982-1982 Research Fellow, Agency for Defense Development
1986 - 1989 Research Assistant, University of Glasgow
1983 to present Professor, University of Ulsan
|
| |
| Publications - Thesis |
|
| On the strength analysis of the stiffener with asymmetric cross section, MSc thesis, 1980, Seoul National University |
|
| Reliability analysis of continuous structural systems, Ph.D. thesis, 1989, University of Glasgow |
|
| |
| Publications - Books |
|
| Introduction to finite element method, 1985, Dongmyung Pub. Co. (in Korean) |
|
| Fundamentals of finite element method, 2005, Ulsan University Pub. (in Korean) |
|
| Engineering mathematics, 2003, Gyowoo Pub. Co. (in Korean) |
|
| Numerical analysis, 2003, Inter Vision Pub. Co., (in Korean) |
|
| Mechanics of materials, 2003, Inter Vision Pub. Co., (in Korean) |
| |
| Publications - Papers |
|
| On the strength analysis of the stiffener with asymmetric cross section, J. Society of Naval Architects of Korea, vol.17, no.1, 1980, pp 11-18 (in Korean) |
|
| On the nonlinear analysis of ship's structures-ultimate strength analysis of plates and stiffened plates under compressive load, J. Society of Naval Architects of Korea, vol.20, no.1, 1983, pp 11-20 (in Korean) |
|
| Compressive ultimate strength analysis of plates with initial imperfections, J. Society of Naval Architects of Korea, vol.22, no.1, 1985, pp 31-37 (in Korean) |
|
|
Basic study on the reliability analysis of structural systems, J. Korean Society of Ocean Engineering, vol.3, no.2, 1989, pp 645-657 |
|
|
On the study of system reliability analysis of tension leg platforms, J. Society of Naval Architects of Korea, vol.27, no.2, 1990, pp 55-62 |
|
|
Optimum structural design of stiffened cylinders based on reliability analysis, J. Society of Naval Architects of Korea, vol.27, no.4, 1990, pp 67-71 |
|
|
System design of floating offshore structures, Trans. RINA vol.130, 1990, pp 223-240 |
|
|
On the transverse strength of SWATH ship ? reliability analysis against ultimate and fatigue strength, J. Society of Naval Architects of Korea, vol.28, no.1, 1991, pp 189-196 |
|
|
Review of the application of the first-order reliability methods to safety assessment of structures, J. Society of Naval Architects of Korea, vol.28, no.2, 1991, pp 195-206 |
|
|
Reliability analysis of floating offshore structures ? fundamental study of system reliability analysis, J. Society of Naval Architects of Korea, vol.28, no.2, 1991, pp 207-227 |
|
|
Reliability analysis of structural systems by using the stochastic finite element method, J. the Computational Structural Engineering Institute of Korea, vol.5, no.1, 1991, pp 97-108 |
|
|
Reliability assessment against ultimate bending moment of ships' hull girder, J. Society of Naval Architects of Korea, vol.29, no.1, 1992, pp 103-112 |
|
|
Limit state design of ship structures based on reliability analysis, J. Society of Naval Architects of Korea, vol.29, no.4, 1991, pp 173-178 |
|
|
Plate forming automation system of steel plates by line heating method(I), J. Society of Naval Architects of Korea, vol.31, no.3, 1994, pp 139-146 |
|
|
Development of the automatic marking generation system for the plate forming by line heating, J. of Ship Production, SNAME, vol.12, no.4, 1996, pp 247-253 |
|
|
Fatigue strength analysis and reliability analysis of D/H VLCC, J. Society of Naval Architects of Korea, vol.34, no.2, 1997, pp 64-74 |
|
|
Plate forming automation system of steel plates by line heating method(III), J. Society of Naval Architects of Korea, vol.34, no.2, 1997, pp 85-89 |
|
|
Safety assessment of offshore structural system using the response surface approach, J. Korean Society of Ocean Engineering, vol.11, no.3, 1997, pp 1-7 |
|
|
Structural reliability analysis of offshore structure at cold region, J. Korean Society of Ocean Engineering, vol.11, no.3, 1997, pp 8-19 |
|
|
Fatigue strength analysis of marine propeller blade to change in skew angle, J. Society of Naval Architects of Korea, vol.35, no.1, 1998, pp 80-87 |
|
|
Development of software system for plate forming simulation, J. Korean Society of Ocean Engineering, vol.13, no.1, 1999, pp 79-87 |
|
|
Development of numerical control system for plate forming automation, J. Korean Society of Ocean Engineering, vol.17, no.1, 2003, pp 72-79 |
|
|
A study on the accuracy control of panel blocks, J. Korean Society of Ocean Engineering, vol.18, no.1, 2004, pp 35-40 |
|
|
Simulator for weld-induced deformation prediction of panel blocks, J. Society of Naval Architects of Korea, vol.41, no.1, 2004, pp 55-63 |
|
|
The effect of specialized project for the regional university on the engineering education, Korean Society of Engineering Education, 2004, pp30-39 (in Korean) |
|
|
Thermal deformation of curved plates by line heating, J. Korean Society of Ocean Engineering, vol.19, no.1, 2005, pp 33-38 |
|
|
Development of deformation prediction model for line heating of steel plates, Special Issue of the Society of Naval Architects of Korea, 2005, pp 177-184 |
|
|
On the design of the brackets without flange in ships' structure, J. Society of Naval Architects of Korea, vol.43, no.2, 2006, pp 197-205 |
|
|
Study on the design of upper deck hatch corner insert plates of large container carriers, J. Society of Naval Architects of Korea, vol.43, no.3, 2006, pp 331-339 |
|
|
On the ultimate longitudinal strength assessment of ships¡¯ hull structure, J. Society of Naval Architects of Korea, vol.43, no.3, 2006, pp 340-350 |
|
|
On the deformation control of ship's thin plate block by applying the tensioning method, J. Korean Society of Ocean Engineering, vol.20, no.3, 2006, pp 103-108 |
|
|
Comparative Study on the Application of Direct Analysis Method to Large Container Carriers, J. Society of Naval Architects of Korea, vol.44, no.4, 2006, pp 484-493 |
|
|
Assessment of Fatigue Strength Characteristics of Tendon Porch in Offshore Platforms for API 2W Gr. 50 Steel, J. Korean Society of Ocean Engineering, vol.20, no.5, 2006, pp 82-88 |
|
|
On the Weld-induced Deformation Analysis of Aluminum Plates, J. Society of Naval Architects of Korea, vol.44, no.1, 2007, pp 32-39 |
|
|
Optimum Structural Design of Panel Block Considering the Productivity, J. Society of Naval Architects of Korea, vol.44, no.2, 2007, pp 139-147 |
|
|
Fatigue Strength Assessment of TLP Tendon Porch Using API 2W Gr.50 Steel¡±, J. SOTEC, vol.11, no.1, 2007. 03. 20, pp 25-35. |
|
|
A Simplified Method to Predict the Weld-induced Deformation of Curved Plates, J. Society of Naval Architects of Korea, vol.44, no.5, 2007 (to be published) |
|
|
On the Weld-Induced Deformation Control of Ship's Thin Plate Block (I), J. Society of Naval Architects of Korea, vol.44, no.5, 2007 (to be published) |
|
|
On the Weld-Induced Deformation Control of Ship's Thin Plate Block (II), J. Society of Naval Architects of Korea, vol.44, no.5, 2007 (to be published) |
|
|
A Study on the Prediction of Welding Distortion and Residual Stress for Channel I Butt SA Weldment using FE Analysis, J. Society of Naval Architects of Korea, vol.44, no.6, 2007 (to be published) |
|
|
A Study on the Reduction of Fillet Welding Deformation by Applying the Tensioning Method, J. Society of Naval Architects of Korea, vol.44, no.6, 2007 (to be published) |
|
| |
| Publications - Proceedings |
|
|
Structural Reliability Analysis of Floating Offshore Structures, Proc. 2nd IFIP WG 7.5 Conf. on Reliability and Optimization of Structural Systems, London, U.K., 1988, pp.147-162 |
|
|
Reliability Analysis of TLP Structural Systems, Proc. 8th International Conference on Offshore Mechanics & Arctic Engineering (OMAE), Hague, Netherland, vol.2, 1989, pp.363-374 |
|
|
System Design of Floating Offshore Structures, RINA Spring Meeting, London, 1989, Paper No.8 |
|
|
On the Study of System Reliability Analysis of Tension Leg Platforms, Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, 1989, pp.393-409 |
|
|
Sensitivity Study of Reliability to Strength and Loading Variables for Stiffened Cylinder, Proc. of the Annual Autumn Meeting, The Korean Society of Ocean Engineers, 1989, pp.137-145 |
|
|
System Reliability of TLP Structures to Resistance Variables, Proc. 9th International Conference on Offshore Mechanics & Arctic Engineering (OMAE), Houston, Texas, USA, vol.2, 1990, pp.115-123 |
|
|
Reliability-Based Optimisation of Stiffened Cylinders, Proc. 1st International Conference on PACOMS, Seoul, Korea, vol.3, 1990, pp.243-248 |
|
|
Redundancy Consideration in Reliability-Based Structural Design, Proc. 1st International Conference on PACOMS, Seoul, Korea, vol.3, 1990, pp.295-304 |
|
|
Reliability Assessment against Ultimate Bending Moment of Ship's Hull Girder, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, 1990, pp.384-402 |
|
|
Optimum Structural Design of Stiffened Cylinders Based on Reliability Analysis, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, 1990, pp.403-412 |
|
|
On the Transverse Strength of SWATH Ships-reliability analysis against ultimate and fatigue strength, Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, 1990, pp.249-234 |
|
|
Evaluation of Ultimate Strength and Safety Assessment of Double Skin Hull Structure, Proc. of the Annual Autumn Meeting, Proc. Society of Naval Architecture of Korea, 1990,, pp.255-264 |
|
|
Reliability Analysis of Structural Systems by Using the Stochastic Finite Element Method, Proc. 4th IFIP WG 7.5 Conf. on Reliability and Optimization of Structural Systems, Technical University of Munich, Germany, 1991, pp.267-284 |
|
|
Review of the Application of the First-Order Reliability Methods to Safety Assessment of Structures, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, 1991, p.183 |
|
|
Reliability Analysis of Floating Offshore Structures - fundamental study of system reliability analysis, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, 1991, p.184 |
|
|
Safety Assessment of Double Skinned Hull Structure against Ultimate Bending and Fatigue Strength, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, 1991, p.280 |
|
|
Ultimate Strength Analysis and Safety Assessment of Catamarans Structure, Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, 1991, p.393 |
|
|
Reliability-Based Limit State Design Format of Ship Structures, PRADS'92, vol.2, 1992, pp.820-833 |
|
|
On the Reliability Assessment of Double Skinned Hull Structures, PRADS'92, vol.2, 1992, pp.834-846 |
|
|
On the Reliability-Based Design of Floating Offshore Platforms", Proc. 29th Ocean Engineering Research Workshop, 1992, pp.411-427 |
|
|
Limit State Design of Ship Structures Based on Reliability Analysis, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, 1992, pp.247-251 |
|
|
Structural Reliability Analysis and Its Application to the Assessment of Stiffened Plates, Proc. of Ship and Ocean Structural Engineering Workshop, Seoul National University, 1992, pp.53-80 |
|
|
Application of Structural Systems Reliability Theory for Offshore Platform Design, Proc. 5th IFIP WG 7.5 Conf. on Reliability and Optimization of Structural Systems, Japan, 1993 |
|
|
Investigation of Response Surface for Reliability Analysis of Offshore Structures, Proc. 12th International Conference on Offshore Mechanics & Arctic Engineering (OMAE), Glasgow, U.K., vol.2, 1993, pp.323-326 |
|
|
Application of Stochastic Finite Element Method to System Reliability Analysis of Offshore Structures, Proc. 6th International Conference on Structural Safety and Reliability (ICOSSAR), Innsbruck, Austria, vol.1, 1993, pp.355-360 |
|
|
System Reliability Analysis Using Response Surface and Monte Carlo Approaches, Proc. 6th International Conference on Structural Safety and Reliability (ICOSSAR), Innsbruck, Austria, vol.3, 1993, pp.1515-1528 |
|
|
On the Integrated Computer Program System for Structural Analysis and Design, Proc. EASEC-4 International Conference on Structural Engineering and Construction, Seoul, Korea, vol.1, 1993, pp.183-188 |
|
|
Reliability Estimation of Complex Structural Systems, Proc. EASEC-4 International Conference on Structural Engineering and Construction, Seoul, Korea, vol.3, 1993, pp.2017-2022 |
|
|
Toward a System of Integrating Structural Analysis and Design Procedure, Proc. of The Computational Structural Engineering Institute of Korea Symposium-Fall, 1993, pp.120-127 |
|
|
Reliability Analysis of Floating Offshore Structures - structural systems reliability to change in uncertainty of design variables, Proc. of The Computational Structural Engineering Institute of Korea Symposium-Fall, 1993, pp.224-231 |
|
|
Risk Analysis of Offshore Structures Using the Response Surface Approach, Proc. of the Annual Autumn Meeting, The Korean Society of Ocean Engineers, 1993, pp.169-176 |
|
|
Development of an Efficient Structural Analysis Technique of Complex Structures, Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, 1993, pp.379-384 |
|
|
Plate forming automation system of steel plates by line heating method (I), Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, 1993, pp.417-422 |
|
|
Development of Simulator for Steel Plate Forming by Line Heat Method, Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, 1993, pp.423-428 |
|
|
On the Automation System of Plate Forming by Line Heating Method in Shipbuilding", Proc. 8th International Conference on Computer Applications in Shipbuilding (ICCAS), Bremen, Germany, 1994, pp.3.3-3.13
|
|
|
On the Marking Generation System for Steel Plate Forming by Line Heating", Proc. 8th Techanical Exchange & Advisory Meeting (TEAM), National Taiwan Univ., 1994, pp.505-516
|
|
|
Plate forming automation system of steel plates by line heating method (III), Proc. Society of Naval Architecture of Korea, Autumn Meeting, 1995, pp.95-99
|
|
|
Heating System for Plate Forming, Proc. of Ship Production Technology Workshop, Society of Naval Architecture of Korea, Hyundai Heavy Industry Co., Ulsan, 1996, pp.12.1-12.10
|
|
|
Fatigue strength analysis of marine propeller blade to change in skew angle, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Samsung Heavy Industry Co., Koje, 1996, pp.49-52
|
|
|
Fatigue Strength Analysis and Reliability Analysis of D/H VLCC, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Samsung Heavy Industry Co., Koje, pp.53-58
|
|
|
Development of Simple Prediction Method for Welding Distortion in Fillet Joints, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Samsung Heavy Industry Co., Koje, 1996, pp.265-270
|
|
|
Prediction of Welding Deformation of Panel Block using Simplified Analysis Method, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Samsung Heavy Industry Co., Koje, 1996, pp.271-276
|
|
|
Fatigue Strength Analysis of Ship Structure by Spectral Fatigue Analysis, Proc. the Annual Summer Meeting, the Korea Ship and Offshore Structure Congress, Busan National University, 1996, pp.117-132
|
|
|
Comparative Study on the fatigue Strength Assessment of Ship Structures, Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, Seoul National University, 1996, p.428
|
|
|
A Study on the Accuracy Control of Block Assembly in Shipbuilding, Proc. ICCAS'97, Yokohama, Japan, 1997, pp.367-381
|
|
|
Ultimate Strength of Offshore Structural Systems, Proc. of the Annual Winter Meeting, the Korea Ship and Offshore Structure Congress, Busan National University, 1997, pp.64-79
|
|
|
Prediction of Welding Deformation of Fillet Welded Girder Plate using Simplified Analysis Method, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Republic of Korea Naval Academy, Jinhae, pp.375-381
|
|
|
A Study on the Accuracy Control of Block Assembly in Shipbuilding (I), Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Republic of Korea Naval Academy, Jinhae, 1997, pp.467-474
|
|
|
A Study on the Accuracy Control of Block Assembly in Shipbuilding (II), Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Republic of Korea Naval Academy, Jinhae, 1997, pp.475-480
|
|
|
A Study on the Production Oriented Structural Design Information System of Panel Blocks, Proc. PRADS'98, The Hague, Netherland, 1998, pp.359-364
|
|
|
Application of FSA Metholodogy to Safety Assessment of Ship Structures, Proc. of the Annual Autumn Meeting, Society of Naval Architecture of Korea, Inha University, Inchon, 1998, pp.310-314
|
|
|
Optimum Structural Design of Naval Surface Ships, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, DSME, Koje, 1999, pp.348-351
|
|
|
Investigation of Applicability of Formal Safety Assessment Methodology to No.1 Cargo Hold Flooding of Bulk Carriers", Proc. OMAE 2000, New Orieans, LA, USA, pp.1-7
|
|
|
Midship Section Design Optimization for Naval Surface Ship's Structural Design, Proc. IMDC 2000, pp.273-282
|
|
|
Application of Formal Safety Assessment Methodology to Hold Flooding of Bulk Carriers, Proc. of the Annual Winter Meeting, the Korea Ship and Offshore Structure Congress, 2000, University of Ulsan, Ulsan, pp.75-88
|
|
|
Probabilistic Fatigue Strength Assessment of Ship Structures, Proc. of the Annual Winter Meeting, the Korea Ship and Offshore Structure Congress, 2000, University of Ulsan, Ulsan, pp.89-100
|
|
|
Application of Formal Safety Assessment Methodology to Hold Flooding of Bulk Carriers, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Chosun University, Kwangju, 2000, pp.319-323
|
|
|
Probabilistic Fatigue Strength Assessment of Ship Structures, Proc. of the Annual Spring Meeting, Society of Naval Architecture of Korea, Chosun University, Kwangju, 2000, pp.324-328
|
|
|
Weld Induced Deformation Control of Panel Blocks, Proc. of the Annual Spring Meeting, the Korean Society of Ocean Engineers, Halla University, Wonju, 2000, pp.205-209
|
|
|
Study on the Weld-Induced Deformation Control of Panel Blocks, Proc. of the Annual Autumn Meeting, the Korean Society of Ocean Engineers, Samsung Heavy Industry Co., Koje, 2000, pp.275-278
|
|
|
Application of Formal Safety Assessment Metholodogy to Marine Structural Design, Proc. of the Annual Spring Meeting, the Korean Society of Ocean Engineers, 2001, University of Ulsan, Ulsan, 2001, pp.133-138
|
|
|
Numerical Control System for the Automation of Steel Plate Forming, Proc. of the Annual Autumn Meeting, the Korean Society of Ocean Engineers, Republic of Korea Naval Academy, 2002, pp.318-322
|
|
|
On the Effect of Specialized Project for the Local University on the Engineering Education, Proc. KORUS 2003, vol.4, 2003. 6. 28-7.6, Univ. of Ulsan, pp.247-253
|
|
|
Development of Deformation Predicting Model for Line Heating of Steel Plates, Proc. of the Annual Autumn Meeting, the Korean Society of Ocean Engineers, Chosun University, Kwangju, 2003, pp.121-126
|
|
|
Management of Weld-Induced Deformation for Panel Blocks, Proc. 14th International Offshore & Polar Engineering Conference, Toulon, France, May 23-28, 2004, vol.IV, pp 166-170.
|
|
|
Development of Deformation Predicting Model for Line Heating of Steel Plates, Proc. of Ship Production Technology Workshop, Society of Naval Architecture of Korea, Sanchung. 2004
|
|
|
On the Deformation Control of Ships' Thin Plate Block by Applying the Tensioning Method, Proc. of the Annual Autumn Meeting, the Korean Society of Ocean Engineers, Kwangdong University, Gangleung, pp.80-85.
|
|
|
Ultimate Strength Analysis of Tripping Bracket Proc. of the Annual Autumn Meeting, the Korean Society of Ocean Engineers, Kwangdong University, Gangleung, pp 86-90
|
|
|
On the Ultimate Longitudinal Strength Assessment, Proc. of Korean Marine Technology Conference, Pusan, Bexco, 2006, pp 878-883
|
|
|
On the Fatigue Strength Behaviour of API 2W Steel, Proc. of Korean Marine Technology Conference, Pusan, Bexco, 2006, pp 950-956
|
|
|
On the Deformation Control of Ship's Thin Plate Block by Applying the Tensioning Method (I), Proc. of Korean Marine Technology Conference, Pusan, Bexco, 2006, pp 1157-1164
|
|
|
On the Deformation Control of Ship's Thin Plate Block by Applying the Tensioning Method (II), Proc. of Korean Marine Technology Conference, Pusan, Bexco, 2006, pp 1165-1169
|
|
|
On the Weld-Induced Deformation Analysis of Aluminum Plates, Proc. of Korean Marine Technology Conference, Pusan, Bexco, 2006, pp 1170-1175
|
|
|
Development of N/C Nesting Plan CAD System for Plate Cutting, Proc. of Korean Marine Technology Conference, Pusan, Bexco, 2006, pp 1582-1586
|
|
|
Development of Interchangeable System for NC Data in Plate Cutting, Proc. of Korean Marine Technology Conference, Pusan, Bexco, 2006, pp 1784-1787
|
|
| |
| <- back |
|
|
